hp AlphaServer ES45 - North America/U.S. QuickSpecs

Overview Standard Features Systems/Options Options TechSpecs

QuickSpecs

hp AlphaServer ES45

At A Glance

AlphaServer™ ES45 Systems include:

Alpha 21264C 68/1000-MHz CPU with 8-MB L2 Dual Data Rate Cache or
Alpha 21264D 68/1250-MHz CPU with 16-MB L2 Dual Data Rate Cache
Six 64-bit PCI I/O expansion slots for Model 1B (4 slots are PCI hot-plug ready) plus one AGP 4X graphics slot
Ten 64-bit PCI I/O expansion slots for Models 2, 2B, and 3B
(7 slots are PCI hot-plug ready)
Up to four PCI buses

Model 1B or Model 1

Two 64-bit/66-MHz PCI buses
One 64-bit/33-MHz PCI bus
One AGP 4X bus

Model 2B or Model 2

Three 64-bit/66-MHz PCI buses
One 64-bit/33-MHz PCI bus

Model 3B or Model 3

One 64-bit/66-MHz PCI bus

Three 64-bit/33-MHz PCI buses

Up to 32-GB memory using 512-MB, 1-GB, 2-GB, or 4-GB memory options

1.44-MB diskette drive

16X DVD-ROM drive

Two 9-pin serial ports

One 25-pin parallel port

Remote Management Console (RMC) – dedicated serial port, 6-pin MMJ connector

Keyboard and mouse port

Knockouts for two additional 68-pin external SCSI connections

One power supply

Integral remote system management console

Customer documentation

Tru64™ UNIX™ or OpenVMS™ Factory Installed Software

Protected by HP Services, including one-year hardware warranty, on-site with 5 x 9 next business day response.

Overview Standard Features Systems/Options Options TechSpecs

Standard Features

Processor	Alpha 21264C 68/1000-MHz CPU or Alpha 21264D 68/1250-MHz CPU

Cache Memory	8-MB (1 GHz) or 16-MB (1.25 GHz) L2 Dual Data Rate Backup Cache

Upgradability	Supports additional processors and upgrades of memory and hard drives

Memory	Minimum	1 GB – AlphaServer ES45
	Maximum	16 GB (16 DIMM slots) – Model 1B, or Model 1 32 GB (32 DIMM slots) – Model 2B or Model 2, Model 3B or Model 3

Network Controller	Choice of Ethernet controllers

Expansion	PCI I/O slots	Up to ten PCI slots – See PCI Configuration Guidelines

Storage	Diskette Drive	1.44-MB diskette drive in dedicated slot
	DVD-ROM Drive	16X DVD-ROM drive
	Hard Drives	Choice of 18.2-GB, 36.4-GB, 72.8-GB, or 146-GB drives

Interfaces	Parallel	One 25-pin parallel port
	Serial	Two 9-pin serial ports
	Keyboard	One port
	Mouse	One port
	Remote Management Console port (RMC)	One 6-pin MMJ dedicated port
	SCSI connections	Knockouts for two additional 68-pin external SCSI connections

Graphics	Optional

Form Factor	Tower	Up to 12 Universal disk drives
	Pedestal	Up to 40 Universal disk drives
	Rackmount (M-Series Cabinet)	Up to 152 Universal disk drives

Power Supply	One auto sensing power supply, hot swappable, N+1, power factor corrected

Manageability	Compaq Insight Manager?/font>

OS Support	AlphaServer ES45 Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
	AlphaServer ES45 OpenVMS systems include pre-installed software, Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS V3.1
	Minimum OS support - Tru64 UNIX V5.1A or OpenVMS V7.3, Linux RedHat V6.2, Linux SuSE V6.3 or greater

Service and Support	Protected by HP Services including a one-year on-site hardware warranty with next business day response. Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.
AlphaServer ES45 systems are available in the following models or configurations: Model 1B (1 GHz) or Model 1 (1.25 GHz) Model 2B (1 GHz) or Model 2 (1.25 GHz) Model 3B (1 GHz) or Model 3 (1.25 GHz) When configuring an AlphaServer ES45 system, refer to the following chart that summarizes the features of each model as well as the differences between each model.

AlphaServer ES45 Model Summary	Model 1B (1 GHz) Model 1 (1.25 GHz)	Model 2B (1 GHz) Model 2 (1.25 GHz)	Model 3B (1 GHz) Model 3 (1.25 GHz)
I/O Slots	7	10	10
- 33-MHz PCI Slots	2	4	8
- 66-MHz PCI Slots	4	6	2
- 4X AGP Slots	1	0	0
Hot-swap PCI Slots	4	7	7
Power Supplies (Minimum/Maximum)	1-3	1-3	1-3
Power Supply (DC Watts) One included – maximum three power supplies per system	3X-H7514-AA	3X-H7514-AA	3X-H7514-AA
	1080 Watts	1080 Watts	1080 Watts
Memory (Minimum/Maximum)	1 GB – 16 GB	1 GB – 32 GB	1 GB – 32 GB
Memory Option (4-GB Option)	MS620-DB	MS620-DB	MS620-DB
Memory Option (4-GB Option)	Higher Power DIMM	Higher Power DIMM	Higher Power DIMM
Memory Channel I/O Space (CCMAB-AA) See Memory Channel – Step 9	128K	128K	512K or 128K

NOTE: Minimum firmware for 1.25-GHz systems is V6.2-8, minimum SROM firmware is V2.22-F. Firmware files are available at: http://ftp.digital.com/pub/Digital/Alpha/firmware/interim/es45/v6.2C/

PCI Configuration Guidelines	Modules designed for 5.0 V signaling and 33-MHz bus speed can only operate in 5.0 V/33-MHz slots Modules designed for 3.3 V signaling and 66-MHz bus speed can only operate in 66-MHz slots Universal PCI modules can operate in all slots (3.3 V and 5.0 V) Universal PCI modules operating at 33 MHz placed in a 66-MHz slot will reduce the entire hose to operate at 33 MHz Universal PCI modules capable of operating at 66 MHz when placed in a 33-MHz slot will operate at 33 MHz PCI hot-plug ready slots are designed to enable PCI modules to be added or removed while the system is powered and running. Subsequent operating system versions above Tru64 UNIX V5.1A and OpenVMS V7.3 will provide support for hot-plug PCI functionality PCI Module Descriptions: PCI modules listed in this document as 33 MHz or 66 MHz refer to the module’s maximum PCI bus speed. Modules that can only operate at 5 V are designated as 5 V – 33-MHz modules. Universal PCI modules are designated as 3.3/5 V and can be installed into 33-MHz or 66-MHz slots. AlphaServer ES45 systems provide four I/O hoses, each is configured differently as illustrated in the following charts for Models 1B, 2B, and 3B.

AlphaServer ES45 PCI bus and slot specification for Model 1B or Model 1 follows:
PCI Slot	PCI Bus Speed	Signal Voltage	PCI Hot-Plug	PCI Hose Number
1	33 MHz	5.0 V	No	0
2	33 MHz	5.0 V	No	0
3	AGP 4X	1.5 V	No	2
4	66 MHz	3.3 V	Yes	3
5	66 MHz	3.3 V	Yes	3
6	-	-	-	-
7	66 MHz	3.3 V	Yes	1
8	66 MHz	3.3 V	Yes	1

AlphaServer ES45 PCI bus and slot specification for Model 2B or Model 2 follows:
PCI Slot	PCI Bus Speed	Signal Voltage	PCI Hot-Plug	PCI Hose Number
1	66 MHz	3.3 V	No	2
2	66 MHz	3.3 V	No	2
3	33 MHz	5.0 V	No	0
4	66 MHz	3.3 V	Yes	3
5	66 MHz	3.3 V	Yes	3
6	33 MHz	5.0 V	Yes	0
7	66 MHz	3.3 V	Yes	1
8	66 MHz	3.3 V	Yes	1
9	33 MHz	5.0 V	Yes	0
10	33 MHz	5.0 V	Yes	0

AlphaServer ES45 PCI bus and slot specification for Model 3B or Model 3 follows:
PCI Slot	PCI Bus Speed	Signal Voltage	PCI Hot-Plug	PCI Hose Number
1	33 MHz	5.0 V	No	2
2	33 MHz	5.0 V	No	2
3	33 MHz	5.0 V	No	0
4	66 MHz	3.3 V	Yes	3
5	66 MHz	3.3 V	Yes	3
6	33 MHz	5.0 V	Yes	0
7	33 MHz	5.0 V	Yes	1
8	33 MHz	5.0 V	Yes	1
9	33 MHz	5.0 V	Yes	0
10	33 MHz	5.0 V	Yes	0

Overview Standard Features Systems/Options Options TechSpecs

Systems/Options

Step 1 - Select system

AlphaServer ES45 Model 1B or Model 1, Model 2B or Model 2, and Model 3B Systems require the mandatory selection of the following items. AlphaServer ES45 Base Systems require the selection of a minimum of 1-GB memory in addition to the following mandatory items.

Disk drive cage or StorageWorks™ shelf (Step 5)

System disk drive (Step 5)

Tower, Pedestal, or Rack Kit (Step 6)

Ethernet adapter (Step 8)

Storage adapter (Step 10)

Order country-specific keyboard and mouse only if required (Step 14)

Software media and documentation for first system onsite (Step 16)

NOTE: Only 2-5-2 part numbers are factory integrated.

AlphaServer ES45 Systems (1000 MHz)
ES45	OS		CPU		I/O Slots			Memory/Cache		Order Number
Model 1B	Tru64 UNIX		1000 MHz		6 PCI, 1 AGP 4X			1 GB/8 MB		DA-66DBA-BA
Model 1B	Tru64 UNIX		1000 MHz		6 PCI, 1 AGP 4X			2 GB/8 MB		DA-66DBA-CA
Model 1B	Tru64 UNIX		1000 MHz		6 PCI, 1 AGP 4X			4 GB/8 MB		DA-66DBA-DA

Model 1B	OpenVMS		1000 MHz		6 PCI, 1 AGP 4X			1 GB/8 MB		DY-66DBA-BA
Model 1B	OpenVMS		1000 MHz		6 PCI, 1 AGP 4X			2 GB/8 MB		DY-66DBA-CA
Model 1B	OpenVMS		1000 MHz		6 PCI, 1AGP 4X			4 GB/8 MB		DY-66DBA-DA

Model 2B	Tru64 UNIX		1000 MHz		10 PCI			1 GB/8 MB		DA-68DBA-BA
Model 2B	Tru64 UNIX		1000 MHz		10 PCI			2 GB/8 MB		DA-68DBA-CA
Model 2B	Tru64 UNIX		1000 MHz		10 PCI			4 GB/8 MB		DA-68DBA-DA

Model 2B	OpenVMS		1000 MHz		10 PCI			1 GB/8 MB		DY-68DBA-BA
Model 2B	OpenVMS		1000 MHz		10 PCI			2 GB/8 MB		DY-68DBA-CA
Model 2B	OpenVMS		1000 MHz		10 PCI			4 GB/8 MB		DY-68DBA-DA

Model 3B	Tru64 UNIX		1000 MHz		10 PCI			1 GB/8 MB		DA-67DBA-BA
Model 3B	Tru64 UNIX		1000 MHz		10 PCI			2 GB/8 MB		DA-67DBA-CA
Model 3B	Tru64 UNIX		1000 MHz		10 PCI			4 GB/8 MB		DA-67DBA-DA

Model 3B	OpenVMS		1000 MHz		10 PCI			1 GB/8 MB		DY-67DBA-BA
Model 3B	OpenVMS		1000 MHz		10 PCI			2 GB/8 MB		DY-67DBA-CA
Model 3B	OpenVMS		1000 MHz		10 PCI			4 GB/8 MB		DY-67DBA-DA

AlphaServer ES45 Systems (1250 MHz)
ES45	OS		CPU		I/O Slots		Memory/Cache			Order Number
Model 1	Tru64 UNIX		1250 MHz		6 PCI, 1 AGP 4X		1 GB/16 MB			DA-66EBA-BA
Model 1	Tru64 UNIX		1250 MHz		6 PCI, 1 AGP 4X		2 GB/16 MB			DA-66EBA-CA
Model 1	Tru64 UNIX		1250 MHz		6 PCI, 1 AGP 4X		4 GB/16 MB			DA-66EBA-DA

Model 1	OpenVMS		1250 MHz		6 PCI, 1 AGP 4X		1 GB/16 MB			DY-66EBA-BA
Model 1	OpenVMS		1250 MHz		6 PCI, 1 AGP 4X		2 GB/16 MB			DY-66EBA-CA
Model 1	OpenVMS		1250 MHz		6 PCI, 1 AGP 4X		4 GB/16 MB			DY-66EBA-DA

Model 2	Tru64 UNIX		1250 MHz		10 PCI		1 GB/16 MB			DA-68EBA-BA
Model 2	Tru64 UNIX		1250 MHz		10 PCI		2 GB/16 MB			DA-68EBA-CA
Model 2	Tru64 UNIX		1250 MHz		10 PCI		4 GB/16 MB			DA-68EBA-DA

Model 2	OpenVMS		1250 MHz		10 PCI		1 GB/16 MB			DY-68EBA-BA
Model 2	OpenVMS		1250 MHz		10 PCI		2 GB/16 MB			DY-68EBA-CA
Model 2	OpenVMS		1250 MHz		10 PCI		4 GB/16 MB			DY-68EBA-DA

Model 3	Tru64 UNIX		1250 MHz		10 PCI		1 GB/16 MB			DA-67EBA-BA
Model 3	Tru64 UNIX		1250 MHz		10 PCI		2 GB/16 MB			DA-67EBA-CA
Model 3	Tru64 UNIX		1250 MHz		10 PCI		4 GB/16 MB			DA-67EBA-DA

Model 3	OpenVMS		1250 MHz		10 PCI		1 GB/16 MB			DY-67EBA-BA
Model 3	OpenVMS		1250 MHz		10 PCI		2 GB/16 MB			DY-67EBA-CA
Model 3	OpenVMS		1250 MHz		10 PCI		4 GB/16 MB			DY-67EBA-DA

AlphaServer ES45 Base Systems (1000 MHz)
NOTE: Selection of a minimum of 1-GB memory is mandatory for AlphaServer ES45 Base systems.
ES45		OS		CPU/Cache		I/O slots			Order Number
Model 1B		Tru64 UNIX		1000 MHz/8 MB		6 PCI, 1 AGP 4X			DA-66DBA-AA
Model 1B		OpenVMS		1000 MHz/8 MB		6 PCI, 1 AGP 4X			DY-66DBA-AA

Model 2B		Tru64 UNIX		1000 MHz/8 MB		10 PCI			DA-68DBA-AA
Model 2B		OpenVMS		1000 MHz/8 MB		10 PCI			DY-68DBA-AA

Model 3B		Tru64 UNIX		1000 MHz/8 MB		10 PCI			DA-67DBA-AA
Model 3B		OpenVMS		1000 MHz/8 MB		10 PCI			DY-67DBA-AA

AlphaServer ES45 Base Systems (1250 MHz)
Model 1		Tru64 UNIX		1250 MHz/16 MB		6 PCI, 1 AGP 4X			DA-66EBA-AA
Model 1		OpenVMS		1250 MHz/16 MB		6 PCI, 1 AGP 4X			DY-66EBA-AA

Model 2		Tru64 UNIX		1250 MHz/16 MB		10 PCI			DA-68EBA-AA
Model 2		OpenVMS		1250 MHz/16 MB		10 PCI			DY-68EBA-AA

Model 3		Tru64 UNIX		1250 MHz/16 MB		10 PCI			DA-67EBA-AA
Model 3		OpenVMS		1250 MHz/16 MB		10 PCI			DY-67EBA-AA

Overview Standard Features Systems/Options Options TechSpecs

Options

Step 2 - Additional CPU Modules - Optional
One CPU included, three additional CPUs are supported
	SMP upgrade, includes one 68/1000-MHz CPU with 8-MB cache and Tru64 UNIX SMP license	KN610-DB
	SMP upgrade, includes one 68/1000-MHz CPU with 8-MB cache and OpenVMS SMP license	KN610-DC
	SMP upgrade, includes one 68/1250-MHz CPU with 16-MB cache and Tru64 UNIX SMP license	KN610-EB
	SMP upgrade, includes one 68/1250-MHz CPU with 16-MB cache and OpenVMS SMP license	KN610-EC
	NOTE: Minimum firmware for 1.25-GHz systems is V6.2-8, minimum SROM firmware is V2.22-F. Firmware files are available at: http://ftp.digital.com/pub/Digital/Alpha/ firmware/interim/es45/v6.2C/
	NOTE: Existing AlphaServer ES45 1-GHz Model 2 (xx-68DAA-xx) customers who upgrade to 1.25-GHz CPUs, should continue to follow Model 2 configuration guidelines. The following options are required: H7906-A9 power supply and MS620-AA, MS620-BA, and MS620-CA memory options. Do not order 3X-H7514-AA power supplies or MS5620-DB memory options.

Step 3 - Memory - Optional
Base systems do not include memory; select a minimum of 1-GB memory; this is a mandatory selection. All other systems include one memory option.
Maximum four memory options (total of 16 DIMMs) for Model 1B or Model 1 (one per array)
Maximum eight memory options (total of 32 DIMMs) for Models 2B or Model 2, and Model 3B or Model 3 (two per array)
AlphaServer ES45 system includes two memory buses
AlphaServer ES45 system includes two arrays per bus
For Model 2B or Model 2 and Model 3B or Model 3, memory options within an array must be identical
	512-MB memory option (4 x 128-MB DIMMs)	MS620-AA
	1-GB memory option (4 x 256-MB DIMMs)	MS620-BA
	2-GB memory option (4 x 512-MB DIMMs)	MS620-CA
	4-GB memory option (4 x 1024-MB DIMMs) NOTE: Do not order MS620-DB memory option for installation in ES45 1-GHz Model 2 (xx-68DAA-xx) system. MS620-DB memory option can only be installed in (xx-6xDBA-xx) and (xx-6xEBA-xx) systems.	MS620-DB
Memory performance considerations: The AlphaServer ES45 system has two memory buses. When two or more memory options are installed, both buses are utilized, enhancing system performance The AlphaServer ES45 system has two arrays per bus. Interleaved operations reduce the average latency and increase the memory throughput. When all four arrays are populated with the same amount of memory, read-write operations are four-way interleaved, enhancing system performance. The following examples illustrate different ways of configuring a 4-GB system. Case C yields the best performance and is the recommended method for configuring memory on an AlphaServer ES45 system.

ES45 System (one memory option included)	Add-on Memory Options	Total Memory	Total DIMMs	Performance
Case A - DA-68DBA-DA (MS620-DB)	None	4-GB	4	Good
Case B - DA-68DBA-CA (MS620-CA)	MS620-CA	4-GB	8	Better
Case C - DA-68DBA-BA (MS620-BA)	MS620-BA + MS620-BA + MS620-BA	4-GB	16	Best *


NOTE: * = Operating system and application dependent. Up to an 18% performance enhancement has been measured in Case C over Case A.

Step 4 - Additional Power Supply - Optional
	One Power Supply	Standard with Model 1B or 1, 2B or 2, and 3B or 3 systems; provides system support for: Two CPUs One disk drive cage (up to six disk drives) Four memory options (up to 16 DIMMs)
	Two Power Supplies	Optional – Provides system support for: Four CPUs Two disk drive cages (up to 12 disk drives) Eight memory Options (up to 32 DIMMs)
	Third Power Supply	Optional - Provides (N+1) power redundancy system support for two power supply configuration


Additional power supply ordered with a tower system requires an additional country-specific power cord
Pedestal system and Rack kit include three internal IEC/IEC power cords regardless of the number of power supplies ordered
	ES45 1080 W power supply; order for Models 1B, 2B, and 3B (1-GHz) and Models 1, 2, and 3 (1.25-GHz) systems only; do not order for Model 2 (xx-68DAA-xx) systems.		3X-H7514-AA
	ES45 720 W power supply; order for Model 2 (1-GHz xx-68DAA-xx) systems only		H7906-A9

Step 5 - Disk Drive Cage, Universal Drive Shelf, or Universal Disk Drive - Mandatory
Each system supports up to two disk drive cages
Each disk drive cage supports six 1-inch universal disk drives
43xx StorageWorks shelves support up to 14 universal disk drives
Pedestal enclosure supports one system and two disk drive cages, two Universal 43xx StorageWorks shelves
M-Series cabinets supports up to five systems or one system with up to ten StorageWorks shelves

Step 5a - Disk Drive Cage - Requires selection of system disk drive
	Disk drive cage with storage cable accommodates up to six internal 1-inch Universal disk drives – Requires mandatory selection of a Storage Adapter in the system. Requires an internal Ultra2 SCSI or Ultra3 SCSI channel per disk drive cage. Maximum of two storage cages in system.	BA610-6D
	NOTE: See ES45 Configuration Chart for Storage Adapters in Step 10.

Universal Disk Drives (Supported in Disk Drive Cage and Universal StorageWorks Shelves)	18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3848-AA
	36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3838-AA
	36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3849-AA
	72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3839-AA
	72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3851-AA
	146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3841-AA

Step 5b - StorageWorks Model 4314R and Model 4354R Universal Drive Shelves
Up to two shelves in Pedestal form factor
See Step 7 for rack configurations with M-Series cabinets
StorageWorks Model 4314R, 4314T and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-xx split-bus shelf, two SCSI channels are required from selected storage adapters. BN38C-05 cable is required per channel if the connection is not VHDCI/VHDCI. DS-SL13R shelves include one 12-foot VHDCI/VHDCI SCSI cable.
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, U.S. - no support for Model 4314R single-bus shelves with 3X-KZPEA-DB adapter (190209-001)	DS-SL13R-AA
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, Japan - no support for Model 4314R single-bus shelves with 3X-KZPEA-DB adapter (190209-291)	DS-SL13R-AJ
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, U.S. (190211-001)	DS-SL13R-BA
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, Japan (190211-291)	DS-SL13R-BJ
	To add additional power supply for single-bus Universal shelf, U.S. (212980-B21)	DS-SE2UP-AA
	To add additional power supply for single-bus Universal shelf, International (119826-B31)	DS-SE2UP-AI

StorageWorks Model 4314T Standalone Enclosures	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, U.S. (190210-001)	DS-SL13T-AA
	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, International (190210-B31)	DS-SL13T-AB
	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, Japan (190210-291)	DS-SL13T-AJ

Step 6 - System Enclosures - Mandatory selection of Tower, Pedestal, Rack Kit, Power Cords
All AlphaServer ES45 enclosures are carbon black Power cords are mandatory for tower and pedestal enclosures Power cords are included in Rack Kits

Step 6a - Tower Enclosure
Tower enclosure supports one system
Selection of one country-specific power cord is mandatory
Additional power cord is mandatory if additional power supply is ordered.
	200–240V Tower Enclosure	BA61M-CT

Step 6b - Pedestal Enclosure
Pedestal enclosure supports one system, and up to two Universal 43xx StorageWorks shelves.
Selection of two country-specific power cords is mandatory for all systems.
	200–240V Pedestal Enclosure	BA61P-CB

Step 6c - Rack Kit for M-Series Cabinet
Rack Kit required for each AlphaServer ES45 system installed in an M-Series Cabinet
Rack Kit supports one system
	Rack kit for AlphaServer ES45, includes dress bezel, slides, three internal IEC/IEC power cords, all brackets and hardware for mounting in M-Series cabinets, 200-240V	BA61R-CR

Step 6d - Power Cords
	North American 200 to 240V, 75-inch - Tower	BN18J-1K
	North American 200 to 240V, 108-inch - Pedestal	3X-BN64A-1C
	Australia, New Zealand, 2.5-meter (103541-011)	BN19H-2E
	Central Europe, 2.5-meter	BN19C-2E
	Denmark, 2.5-meter (103541-481)	BN19K-2E
	Egypt, India, South Africa, 2.5-meter (103541-AR1)	BN19S-2E
	Israel, 2.5-meter	BN18L-2E
	Italy, 2.5-meter (103541-461)	BN35M-02
	Japan, 2.5-meter, Dentori approved	3X-BN46F-02
	Switzerland, 2.5-meter (103541-511)	BN19E-2E
	UK, Ireland, 2.5-meter	BN19A-2E
	Republic of China (103541-001)	BN19H-2E

Step 7 - M-Series Cabinets
M-Series Cabinet enclosures support up to five systems, or one system with up to ten StorageWorks shelves. M-Series Cabinets require mandatory selection of the following items:
Rear cabinet extender based on cabinet height
Cabinet front door or trim kit based on cabinet height
Second power distribution unit (PDU) – M-Series Cabinets include one H7602 PDU
Factory integration
Ballast kit, if only one system is ordered for the H9A15 cabinet
NOTE: For additional configurations beyond those listed in the following charts, contact CustomSystems.

Cabinet Configuration Chart for AlphaServer ES45 (8U) with 43xx Series StorageWorks Shelves (3U) – Supports high-density configurations
Cabinet (b)	Front Door or Trim Kit	Cabinet Depth Extender	Power Distribution Unit	ES45 Systems	43xx Storage Shelves	Unused U Spaces
H9A10-ME/-MF	H9C10-ZF or H9C10-ZT	H9C10-ZE	With second H7600	1	8	1
(34U)				2	5	2
				3	3	0
				4	0	1
H9A15-ME/-MF	H9C15-ZF or H9C15-ZT	H9C15-ZE	With second H7600	1 (a)	10	2
(41U)				2	8	0
				3	3	7
				4	0	8
			(b)	3	3 or 5	1
			With second H7602	4	0 or 2	2
			With second H7602	5	0	0

NOTES:
Installation of only one AlphaServer ES45 system in an H9A15 cabinet requires the mandatory selection of a ballast kit. H9A1x-ME includes one H7602-EB PDU; H9A1x-MF includes one H7602-DB PDU – Order second PDU. - Single Input - H7600-DB/EB, 240V - Dual Input - H7602-DB/EB, 240V

M-Series Cabinets - Specify cabinet selection	67-inch carbon black cabinet with 59.5-inch or 34U of usable vertical space, 200-240V dual-16A PDU, 16 IEC C13 outlets, two input power plug NEMA L620P, Americas, Asia Pacific; includes rear door.	H9A10-ME
	67-inch carbon black cabinet with 59.5-inch or 34U of usable vertical space, 240V dual-16A PDU, 16 IEC C13 outlets, two input power plug IEC 309, 20A, Europe; includes rear door.	H9A10-MF
	79-inch carbon black cabinet with 71.7-inch or 41U of usable vertical space, 200-240V dual-16A PDU, 16 IEC C13 outlets, two input power plug NEMA L620P, Americas, Asia Pacific; includes rear door.	H9A15-ME
	79-inch carbon black cabinet with 71.7-inch or 41U of usable vertical space, 240V dual-16A PDU, 16 IEC C13 outlets, two input power plug IEC 309, 20A, Europe; includes rear door.	H9A15-MF

Rear Cabinet Extender - Mandatory based on cabinet height	Rear cabinet extender for carbon black H9A10 cabinets	H9C10-ZE
	Rear cabinet extender for carbon black H9A15 cabinets	H9C15-ZE

Front Cabinet Treatment - Mandatory based on cabinet height	Front door for carbon black H9A10 cabinet enclosure	H9C10-ZF
	Front trim kit for carbon black H9A10 cabinet enclosure	H9C10-ZT
	Front door for carbon black H9A15 cabinet enclosure	H9C15-ZF
	Front trim kit for carbon black H9A15 cabinet enclosure	H9C15-ZT

Factory Integration - Mandatory	Factory Integration of systems and storage devices assembled and configured in cabinet enclosure in predefined locations	YS-ASCAA-AA

Ballast Kit - Mandatory if only one ES45 system drawer is ordered for the H9A15 cabinet	Ballast is added to a cabinet at particular locations for specific configurations to meet safety regulations for installation, operation, and service; see Cabinet Configuration Charts.
	Two 35–40 lb (16–18 kg) steel plates	H9C10-MC

Power Distribution Unit - Mandatory	240V single 16A input power plug IEC 309, 12 IEC C13 outlets	H7600-DB
Power Distribution Unit - Mandatory	200–240V single 16A input power plug NEMA L620P, with 12 IEC C13 outlets, North America/Canada/Japan	H7600-EB
	240V dual 16A input power plugs IEC 309, with 16 IEC C13 outlets	H7602-DB
	200–240V dual 16A input power plugs NEMA L620P, with 16 IEC C13 outlets, NA/Canada/Japan	H7602-EB

Storage Shelves Supported in M-Series Cabinets - Optional	For supported StorageWorks shelves, see Step 5b.
Storage Shelves Supported in M-Series Cabinets - Optional


Step 8 - Networking Adapters/Controllers – Mandatory Ethernet Adapter
Step 8a – Networking Adapters/Controllers – Mandatory
Select mandatory Ethernet adapter
Adapters require a minimum of Tru64 UNIX V5.1A or OpenVMS V7.3
Each adapter uses one PCI slot

		Maximum # Supported
		Tru64 UNIX	Open VMS	PCI Slot
Ethernet 10/100/1000	PCI (32/64-bit, 33-MHz to 66-MHz) dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA optional add-on daughter card can be combined with this module.) NOTE: Use BN25G, BN26M, BN24Q, BN28Q twisted pair RJ45 cables.	4	4	3.3/5 V	66 MHz	3X-DE602-BB

Step 8b – Networking Adapters/Controllers – Optional
Ethernet 10/100/1000	PCI-X/PCI single-port 1000 Mbps (MMF with duplex-SC) Gigabit Ethernet; Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: http://ftp1.support.compaq.com/ public/unix/v5.1b/t64v51bb1- c0003000-16672-e- 20030130.README Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires: T64V51AAB21AS0004-20030206.tar NOTE: Use BN34A, BN34B, or equivalent with SC connectors.	8	-	3.3/5 V	66 MHz	3X-DEGXA-SA
Ethernet 10/100/1000	PCI-X/PCI single-port 10/100/1000 Mbps (Twisted-Pair Copper with RJ45) Gigabit Ethernet; Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: http://ftp1.support.compaq.com/ public/unix/v5.1b/t64v51bb1- c0003000-16672-e- 20030130.README Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires: T64V51AAB21AS0004-20030206.tar NOTE: Use BN25G, BN26M, BN24Q, BN28Q twisted pair RJ45 cables.	8	-	3.3/5 V	66 MHz	3X-DEGXA-TA

Ethernet 10/100	Dual-port 10/100 Ethernet (UTP/RJ45) add-on daughter card for use with the 3X-DE602-BB only. The combined 3X-DE602-BB and 3X-DE602-TA modules, running at 66MHz, provide four 10/100 (UTP/RJ45s) ports in a single PCI slot option; allows for a maximum of 16 ports per system. OpenVMS V7.3 requires Tima Kit: DEC-AXPVMS-VMS73_ LAN-V0100—4.PCSI NOTE: 3X-DE602-TA cannot be used standalone. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	3.3/5 V	66 MHz	3X-DE602-TA
Ethernet 10/100	Single-port 100 Mbps (MMF/duplex-SC) add-on daughter card for use with the 3X-DE602-BB. The combined 3X-DE602-BB and 3X-DE602-FA modules, running at 66 MHz, provide two 10/100 (UTP/RJ45s) and one 100Mbps (MMF/SC) ports in a single PCI slot option. NOTE: 3X-DE602-FA cannot be used standalone. Use BN34A or BN34B cables.	4	1 per 3X- DE602 -BB	3.3/5 V	66 MHz	3X-DE602-FA

Multi-function Module	PCI 32-bit, 33-MHz multi-function (single-port 10/100 Ethernet UTP/RJ45, Ultra2 LVD SCSI, and 2D graphics) adapter. Model 1 or 1B requires installation on PCI Bus 0 in slots 1 or 2; Model 2 or 2B 1B requires installation on PCI Bus 0 in slots 3, 6, 9, or 10 NOTE: Tru64 UNIX V5.1A requires Patch Kit 3: T64V51AS0003-20010413.tar. Only one 3X-KZPEA-DB allowed on same PCI bus; no multi-head graphics support; TruCluster support restricted to non-shared SCSI buses only. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	1	1	5V	33 MHz		3X-DEPVZ-AA
Multi-function Module	3X-DEPVZ-AA specific-use 3-meter LVD2 SCSI cable						BN37A-03

FDDI	PCI (32-bit, 33-MHz) to FDDI SAS (MMF/duplex-SC) NIC Use BN34A, BN34B, or BN34D cables.	4	4	3.3/5 V	33 MHz		3X-DEFPA-AC
	PCI (32-bit, 33-MHz) to FDDI DAS (MMF/duplex-SC) NIC Use BN34A, BN34B, or BN34D cables.	4	4	3.3/5 V	33 MHz		3X-DEFPA-DC
	PCI (32-bit, 33-MHz) to FDDI DAS (UTP/RJ45) NIC Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	3.3/5 V	33 MHz		3X-DEFPA-MC
	PCI (32-bit, 33-MHz) to FDDI SAS (UTP/RJ45) NIC Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	3.3/5 V	33 MHz		3X-DEFPA-UC

FDDI-specific Cables	Multimode fiber optic (MMF) 62.5/125um duplex cable with SC-to-MIC connectors xx = available lengths: (01, 03, and 10) for 1, 3, and 10 meters						BN34D-xx

ATM	PCI (32-bit, 33-MHz) to 155 Mbps ATM, Copper NIC with RJ45 connector Use BN25G-xx, or BN26M-xx cables.	6	6	3.3/5 V	33 MHz		3X-DAPBA-UA
	PCI (32-bit, 33-MHz) to 155 Mbps ATM Fiber NIC with SC connector Use BN34B-xx cable.	6	6	3.3/5 V	33 MHz		3X-DAPBA-FA
	PCI (32- bit, 33-MHz) to 622 Mbps ATM Fiber NIC with SC connector Use BN34B-xx cable.	4	-	3.3/5 V	33 MHz		3X-DAPCA-FA

Synchronous Communications	PCI (32-bit, 33-MHz) to Dual-port Intelligent Synchronous Communications NIC – Requires at least one (maximum two) 3X-BC34x sync cable listed below.	4	4	3.3/5 V	33 MHz	3X-PBXDD-AA
Synchronous Communications	PCI (32-bit, 33-MHz) to Quad-port Intelligent Synchronous Communications NIC – Requires at least one (maximum four) 3X-BC34x sync cable listed below.	4	4	3.3/5 V	33 MHz	3X-PBXDD-AB

Synchronous- specific Cables	EIA-530 Single-port cable					3X-BC34G-06
	V.24/EIA-232 Single-port cable					3X-BC34L-06
	V.11/x.21 Single-port cable					3X-BC34S-06
	V.35 Single-port cable					3X-BC34T-06

Asynchronous Communications	PCI (32-bit, 33-MHz) to 4-port Async Communications NIC with DB-25 octopus cable NOTE: The UNIX driver (UNIX Tar File 4001180K.tar) is located at: http://support.digi.com/ support/indexes/ tru64-xr.html The OpenVMS driver kit (Filename 4001778L.bin) is located at http://support.digi.com/ support/drivers/ vms/index-async.html	2	2	3.3/5 V	33 MHz	PBXDA-BA
	PCI (32-bit, 33-MHz) to 8-port Async Communications NIC with DB-25 octopus cables NOTE: The UNIX driver (UNIX Tar File 4001180K.tar) is located at: http://support.digi.com/ support/indexes/ tru64-xr.html The OpenVMS driver kit (Filename 4001778L.bin) is located at http://support.digi.com/ support/drivers/ vms/index-async.html	2	2	3.3/5 V	33 MHz	PBXDA-BB
	PCI (32-bit, 33-MHz 5.0 Volt Bus-Signaling only) to 4-port Async Communications NIC with DB-25 octopus cable	2	2	3.3/5 V	33 MHz	PBXDA-AA
	PCI (32-bit, 33-MHz 5.0 Volt Bus-Signaling only) to 8-port Async Communications NIC with DB-25 octopus cables	2	2	3.3/5 V	33 MHz	PBXDA-AB
	PCI (32-bit, 33-MHz) to 16-port Async Communications Controller and tabletop 16-port distribution box with RJ45 connectors.	2	2	3.3/5 V	33 MHz	PBXDA-AC

Asynchronous Connector Adapters	RJ45-to-DB-25 Converter Cable					CXI01-AC
Asynchronous Connector Adapters	RJ45-to-DEC MJ11 Converter Cable (8 pack)					CXI01-AF

Step 8c – Multi-use Cables

		Maximum # Supported
		Tru64 UNIX	Open VMS	PCI Slot
Ethernet, FDDI, ATM	Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-ST connectors. Xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20, and 30 meters				BN34A-xx
	Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-SC connectors. Xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20, and 30 meters				BN34B-xx
	Category 5e (4-Unshielded Twisted Pairs / UTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. Xx = available lengths: (0B, 0E, 01, 03, 04, 07) for 0.2, 0.5, 1, 3, 4, and 7 meters				BN25G-xx
	Category 5e (4-Twisted Pairs, Screened/ ScTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. Xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters				BN26M-xx
	Category 5e (4-Unshielded Twisted Pairs / UTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. Xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters				BN24Q-xx
	Category 5e (4-Twisted Pairs, Screened / ScTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. Xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters				BN28Q-xx


Step 9 - MEMORY CHANNEL - Optional
Tru64 UNIX Systems (V5.1A)	Each system node in the cluster requires a TruCluster software license (QL-6BRAE-AA) or TruCluster Plus Software Package (QP-6R9AE-AA)

OpenVMS Systems	OpenVMS V7.3 and OpenVMS Cluster license (QL-MUZAE-AA) are required

Configuring Information	Up to two PCI-to-System Area Network adapters (CCMAB-AA) are supported in a single system.
	Two-node clusters can be configured by ordering a CCMAB-AA for each node and one BN39B-04 or BN39B-10 cable; cable connects directly to CCMAB-AA in each node.
	Two-node clusters can also be configured by ordering two CCMAB-A adapters for each node and two BN39B-04 or BN39B-10 cables; cables connect directly to CCMAB-AA in each node.
	For a two-node cluster that will not need to be rebooted when adding additional members, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each node, and one CCMHB-AA hub for the cluster.
	For three- or four- node clusters, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each node, and one CCMHB-AA hub for the cluster. If two CCMAB-AAs are configured in each system, a second CCMHB-AA is required.
	CCMHB-AA includes four CCMLB-AA line cards and supports up to four nodes; expansion up to eight system nodes can be achieved by adding up to four CCMLB-AA line cards.
	If nodes must be separated by a distance longer than standard copper cables allow the CCMFB option converts the output of the standard CCMAB controller or CCMLB line card to single-mode fiber optic cable. The fiber optic connection may be up to 2,000 meters long between two CCMAB controllers connected in virtual hub mode, or 3,000 meters between a CCMAB controller and a CCMHB hub. (The connection from the CCMHB hub to a second system may also be 3,000 meters.) The CCMFB option requires a second PCI slot in the system from which it draws power only. It is normally connected to the corresponding CCMAB controller with the short BN39B-01 cable. The CCMFB is also used in the CCMHB hub where it occupies a slot normally used by the CCMLB line card, limiting expansion to four radial fiber optic connections.
	CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic connections. Two standard length single-mode fiber optic cables are available (BN34R-10 and BN34R-31); however, users normally provide this fiber optic connection. Fiber optic connectivity is completely transparent to the systems using it and has no performance impact.
	NOTE: When configuring Model 1B or Model 1, Model 2B or Model 2 with two Memory Channel Controllers (CCMAB-AA) installed in hose 0 only, all nodes in a Memory Channel cluster must have the window size jumper set to the same size, specifically 128. When configuring Model 3B or Model 3 with two Memory Channel Controllers (CCMAB-AA), all nodes in a Memory Channel cluster must have the window size jumper set to the same size, specifically 512 or 128; Memory Channel Hub must be installed on a different hose (hose 0, 1, or 2). Refer to the TruCluster QuickSpecs for Memory Channel details.

Model 1B (1 GHz) Model 1 (1.25 GHz)	Model 2B (1 GHz) Model 2 (1.25 GHz)	Model 3B (1 GHz) Model 3 (1.25 GHz)
128K I/O	128K I/O	512K or 128K I/O
Use for new or existing clusters; if existing cluster at 512K, shut down and configure all nodes to 128K	Use for new or existing clusters; if existing cluster at 512K, shut down and configure all nodes to 128K	Online add-on to existing 512K configured clusters, OR, use for existing clusters at 128K. If existing cluster at 512K, shut down and configure all nodes to 128K
Supports dual-rail, (two) Memory Channel controllers on single PCI Bus 0	Supports dual-rail, (two) Memory Channel controllers on single PCI Bus 0	Supports dual-rail, (two) Memory Channel controllers on separate PCI Bus (0, 1, or 2)


MEMORY CHANNEL Controller/ System Area Network Hub	PCI-to-System Area Network Controller, maximum two – 5V/33 MHz		CCMAB-AA
MEMORY CHANNEL Controller/ System Area Network Hub	System Area Network Hub with four line cards; includes BN19P-2E power cord for Canada, Japan, and U.S. - for other regions, order appropriate power cord from the following list:		CCMHB-AA
		Hub expansion box with no line cards	CCMHB-BA
		Expansion line card for CCMHB hub	CCMLB-AA
		1-meter cable for CCMAB and CCMHB	BN39B-01
		4-meter cable for CCMAB and CCMHB	BN39B-04
		10-meter cable for CCMAB and CCMHB	BN39B-10
		Copper-to-single mode fiber optic converter - 5V (clock not affected)	CCMFB-AA
		Rackmount kit (3U) for CCMHB (Memory Channel Hub II); required for mounting in H9A1x cabinets.	3X-BA61R-MC
		Power cord for rackmount CCMHB hub	BN35S-02

MEMORY CHANNEL Power Cords	Australia, New Zealand (103541-011)		BN19H-2E
MEMORY CHANNEL Power Cords	Central Europe		BN19C-2E
	Denmark (103541-481)		BN19K-2E
	Egypt, India (103541-AR1)		BN19S-2E
	Ireland, United Kingdom		BN19A-2E
	Israel		BN18L-2E
	Italy (103541-461)		BN35M-02
	Japan, 2.5-meter, Dentori approved		3X-BN46F-02
	Switzerland (103541-511)		BN19E-2E
	Republic of China (103541-001)		BN19H-2E

	NOTE: When using MEMORY CHANNEL, refer to the TruCluster QuickSpecs for configuration guidelines and restrictions: http://www.compaq.com/products/quickspecs/Division/10657.html The MEMORY CHANNEL controller, CCMAB-AA, must be revision D01 or later. NOTE: This website is available in English only.

Step 10 - Storage Adapters/Controllers - Mandatory
NOTE: Refer to the following chart when configuring adapters, shelves, and disks.
AlphaServer ES45 Configuration Chart for Storage Adapters

Storage Adapter		Shelf	Disk Drive	Tru64 UNIX	OpenVMS	Linux
3X-KZPCA-AA		BA610-6D DS-SL13R-xx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A	V7.3	RedHat V6.2 SuSE V6.3 Requires BA610
3.3/5 V	33 MHz
3X-KZPEA-DB		BA610-6D DS-SL13R-Bx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A	V7.3	-
3.3/5 V	66 MHz
3X-KZPBA-CC		External HSZ80	DS-RZ1xx-VW	V5.1A	V7.3	-
3.3/5 V	33 MHz
DS-KGPSA-DA		External HSG80	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A	V7.3	-
3.3/5 V	66 MHz
RAID Controller
DS-KZPCC-AC/CE		BA610-6D DS-SL13R-xx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A	-	-
3X-KZPDC-BE/DF		BA610-6D DS-SL13R-xx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1B/V5.1A	V7.3-1
DS-SWLA4-PD				-	-	RedHat V7.2

		Maximum # Supported
		Tru64 UNIX	Open VMS	PCI Slot
SCSI	PCI 2-port Ultra3 (LVD2) SCSI adapter, 64-bit/66-MHz dual-channel (uses one PCI slot); includes internal 68-pin and external 68-pin VHDCI connectors; requires 3X-BC56J-xx cable to connect adapter to DS-SL13R-Bx shelf; supports internal SDLT tape drives and external SDLT tape libraries. HSZxx RAID controllers not supported. No support for Model 4314R single-bus shelves with 3X-KZPEA-DB adapter. Tru64 UNIX requires graphics adapter to run console utilities (RUN BIOS). 3X-KZPEA-DB adapter supports shared SCSI under Tru64 UNIX V5.1B and TruCluster V5.1B with Initial Patch Kit installed; supports maximum of two nodes per shared bus; requires 3X-BN55A-01 Y-cable and connector plug assembly, and 3X-H32CT-AA external LVD terminator per shared bus. NOTE: Tru64 UNIX Initial Patch Kit for V5.1B is located at: http://ftp1.support.compaq.com/ public/unix/v5.1b	6	6	3.3/ 5 V	66 MHz	3X-KZPEA-DB
	Ultra160 cable, VHDCI to VHDCI (341174-B21 – 6-feet, 341175-B21 – 12-feet, 164604-B21 – 24-feet) xx = 02 (6-feet), 03 (12-feet), 04 (24-feet)					3X-BC56J-xx
	PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit/33-MHz, single-channel (uses one PCI slot); includes internal 68-pin and external 68-pin HD connectors; order BN38C-xx cable to connect adapter to Ultra3 shelf, or order VHDCI converter (BN38E-0B) for use with included cable; HSZxx RAID controllers not supported. No support for shared SCSI. Linux-supported option; maximum one per system	6	6	3.3/5 V	33 MHz	3X-KZPCA-AA
	68-pin HD male-to-VHDCI male UltraSCSI cable; xx = 02, 03, 05, 10, 20 meters					BN38C-xx
	PCI 1-port UltraSCSI wide differential 32-bit/33-MHz PCI adapter (uses one PCI slot); includes external 68-pin HD connector, requires BN38C-xx cable (2 to 20 meters) to connect adapter to differential UltraSCSI shelf or RAID controller	4	4	3.3/5 V	33 MHz	3X-KZPBA-CC
	68-pin HD male-to-VHDCI male UltraSCSI cable; xx = 02, 03, 05, 10, 20 meters					BN38C-xx
Fibre Channel	PCI to 2-Gb Fibre Channel adapter, 64-bit/66-MHz, single-channel (261329-B21) NOTE: When used in a switched standalone or TruCluster environment (with Fibre Channel Switches – see Step 11), a maximum of six adapters is supported. Arbitrated loop is not supported. Tru64 UNIX V 5.1A requires Patch Kit: T64V51AB01AS0001- 20020116.tar	See Note	See Note	3.3/5 V	66 MHz	DS-KGPSA-DA
	See Fibre Channel cables and switches, Step 11

Multi-function Module	PCI 32-bit, 33-MHz multi-function (single-port 10/100 Ethernet UTP/RJ45, Ultra2 LVD SCSI, and 2D graphics) adapter. Model 1 or 1B requires installation on PCI Bus 0 in slots 1 or 2; Model 2 or 2B 1B requires installation on PCI Bus 0 in slots 3, 6, 9, or 10 NOTE: Tru64 UNIX V5.1A requires Patch Kit 3: T64V51AS0003-20010413.tar. Only one 3X-KZPEA-DB allowed on same PCI bus; no multi-head graphics support; TruCluster support restricted to non-shared SCSI buses only. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	1	1	5V	33 MHz	3X-DEPVZ-AA
	3X-DEPVZ-AA specific-use 3-meter LVD2 SCSI cable					BN37A-03

RAID	PCI 3-port PCI to Ultra2, 64-bit, LVD backplane RAID controller with 64-MB cache (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf; requires graphics adapter to run console utilities (SMOR) or alternatively, this can run via a serial line using a PC and terminal emulation software. NOTE: DS-KZPCC-xx RAID controllers require Tru64 UNIX V5.1A; TruCluster support with V5.1A requires Initial Patch Kit: T64V51AB01AS0001- 20020116.TAR	8	-	3.3/5 V	33 MHz	DS-KZPCC-CE
	PCI 1-port PCI to Ultra2, 64-bit, LVD backplane RAID controller with 16-MB cache (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf; requires graphics adapter to run console utilities (SMOR) or alternatively, this can run via a serial line using a PC and terminal emulation software. NOTE: DS-KZPCC-xx RAID controllers require Tru64 UNIX V5.1A; TruCluster support with V5.1A requires Initial Patch Kit: T64V51AB01AS0001-2 0020116.TAR	8	-	3.3/5 V	33 MHz	DS-KZPCC-AC
	PCI 2-port PCI to Ultra3, 64-bit, 66 MHz, LVD backplane RAID controller with 128-MB cache (uses one PCI slot); requires connection to DS-SL13R-xx shelves or BA610-6D card cage. NOTE: Tru64 UNIX requires V5.1B and TruCluster V5.1B (non- shared buses only) with Initial Patch Kit: T64V51BV1AS0001- 20021229.tar Tru64 UNIX requires V5.1A with Initial Patch Kit: T64V51AV21AS0004- 20030206.tar NOTE: No host-based volume shadowing or shared bus support under OpenVMS.	6 per system, 3 per PCI bus	6 per system, 3 per PCI bus	3.3/5 V	66 MHz	3X-KZPDC-BE
	PCI 4-port PCI to Ultra3, 64-bit, 66 MHz, LVD backplane RAID controller with 256-MB cache (uses one PCI slot); requires connection to DS-SL13R-xx shelves or BA610-6D card cage. NOTE: Tru64 UNIX requires V5.1B and TruCluster V5.1B (non-shared buses only) with Initial Patch Kit: T64V51BV1AS0001-20021229.tar Tru64 UNIX requires V5.1A with Initial Patch Kit: T64V51AV21AS0004- 20030206.tar NOTE: No host-based volume shadowing or shared bus support under OpenVMS.	6 per system, 3 per PCI bus	6 per system, 3 per PCI bus	3.3/5 V	66 MHz	3X-KZPDC-DF
	PCI to Fibre Channel adapter, 64-bit single-channel (uses one PCI slot); supported only on Linux, maximum of 4 adapters; requires 3X-KZPCA-AA SCSI adapter and must be installed in 66MHz PCI bus slots only; supports HSG80 controller in transparent failover mode only. No support for mulit-path and multi-bus modes.	-	-		66 MHz only	DS-SWLA4-PD

CI	PCI CI adapter for OpenVMS systems only; requires two 5.0 V PCI slots and CI cable for each adapter NOTE: DS-HSJ80-xx controllers are supported with CIPCA on ES45 systems.	-	2	5 V	33 MHz	CIPCA-BA
	CI cable					BNCIA-xx


Step 11 - Storage Devices - Optional
Step 11a - Tape Devices
	For detailed tape drive information see http://www.compaq.com/products/storageworks/ sitemap.html#tapedrives NOTE: This web site is available in English only.
	System includes embedded 1.44-MB diskette drive
	System includes embedded 5.25-inch half-height 600-MB 16X ATPI DVD-ROM drive
	Removable media slots provide support for up to two 5.25-inch half-height devices, or one 5.25-inch full-height removable media device; select up to two AIT or DAT devices or one DLT/SDLT tape device
	For maximum performance, tape libraries must be configured with Fast Wide Differential (FWD) controllers for tape backup

AIT Tape Drives (Internal)	The following AIT tape drives are supported with 3X-KZPCA-AA and 3X-KZPEA-DB adapters.
	AIT 5.25-inch half-height 35/70-GB 8-mm Wide UltraSCSI tape drive, top gun blue; supports KZPBA-CA, KZPCM-DA adapters and SCSI cable (3X-BN46M-01)	3X-SZ35X-LB
	AIT 5.25-inch half-height 35/70-GB 8-mm LVD UltraSCSI tape drive, carbon black	3R-A2392-AA
	AIT 5.25-inch half-height 50/100-GB 8-mm Ultra2 (LVD) SCSI tape drive, top gun blue; requires SCSI cable (3X-BN46M-01)	3X-SZ50X-LB
	AIT 5.25-inch half-height 50/100-GB 8-mm Ultra2 (LVD) SCSI tape drive, carbon black; requires SCSI cable (3X-BN46M-01) (157766-B22)	3R-A3753-AA
	AIT 5.25-inch half-height 100/200-GB 8-mm Ultra3 SCSI tape drive; supports 3X-KZPEA-DB, 3X-KZPCA-AA, or 3X-DEPVZ-AA LVD adapter, carbon black	3R-A3623-AA
	1-meter Ultra2 68-pin LVD cable with two connectors, multimode terminator and two wide-to-narrow adapters (for connection of 50-pin narrow devices)	3X-BN46M-01

AIT Tabletop Tape Drives	AIT 35/70-GB 8-mm LVD tabletop tape drive, carbon black, North America	216885-001
	Same as above, International	216885-B31
	Same as above, Japan	216885-291
	AIT 50/100-GB 8-mm SCSI tabletop tape drive, carbon black, with 120V North American power cord	157767-002
	Same as above, International	157767-B32
	Same as above, Japan	157767-292
	AIT 100/200-GB 8-mm Ultra3 SCSI tabletop tape drive; supports 3X-KZPEA-DB, 3X-KZPCA-AA, or 3X-DEPVZ-AA LVD adapters, North America, carbon black	249160-001
	Same as above, International	249160-B31

AIT Hot-plug Tape Drives	AIT 35/70-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves	3R-A2396-AA
	AIT 50/100-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves	3R-A2779-AA
	AIT 100/200-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves; supports 3X-KZPEA-DB, 3X-KZPCA-AA, or 3X-DEPVZ-AA LVD adapters	3R-A3621-AA

AIT Autoloaders	AIT 35-GB tabletop autoloader, 8 cartridge, U.S.	292355-001
	Same as above, International	292355-B31
	AIT 35-GB rackmount autoloader, 8 cartridge, U.S.	280349-001
	Same as above, International	280349-B31
	AIT rail kit for autoloader	284930-001

AIT Tape Libraries	SSL2020 AIT tabletop library with one AIT 50-GB drive and 20 slots, LVD	175195-B21
	SSL2020 AIT tabletop library with two AIT 50-GB drives and 20 slots, LVD	175195-B22
	SSL2020 AIT rackmount library with one AIT 50-GB drive and 20 slots, LVD	175196-B21
	SSL2020 AIT rackmount library with two AIT 50-GB tape drives and 20 slots, LVD	175196-B22

DAT Tape Drives (Internal)	Select up to two DAT devices.
DAT Tape Drives (Internal)	The following DAT tape drives are supported with 3X-KZPCA-AA and 3X-KZPEA-DB adapters.
	DAT 12/24-GB 4-mm 5.25-inch half-height SCSI tape drive, top gun blue; requires SCSI cable (3X-BN46M-01)	TLZ10-LB
	DAT 20/40-GB 4-mm 5.25-inch half-height Ultra2 (LVD) SCSI tape drive, top gun blue; requires SCSI cable (3X-BN46M-01)	3X-SD20X-LB
	DAT 20/40-GB 4-mm 5.25-inch half-height Ultra2 (LVD) SCSI tape drive, carbon black; requires SCSI cable (3X-BN46M-01) (157769-B22)	3R-A3752-AA
	1-meter Ultra2 68-pin LVD cable with two connectors, multimode terminator and two wide-to-narrow adapters (for connection of 50-pin narrow devices)	3X-BN46M-01
	DAT 12/24-GB 4-mm narrow single-ended tabletop SCSI tape drive in StorageWorks carrier; Linux supported option; maximum one per system	DS-TLZ10-DB

DAT Tabletop Tape Drives	DAT 20/40-GB 4-mm Wide Ultra2 (LVD) tabletop SCSI tape drive with 120V North American power cord, carbon black; requires Ultra2 (LVD) adapter	157770-002
	Same as above, International	157770-B32
	Same as above, Japan	157770-292

DAT Hot-plug Tape Drive	DAT 20/40-GB DDS4 hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves; Linux supported option; maximum one per system	3R-A2780-AA

DAT Autoloaders	DAT 20/40-GB auto loader external; requires VHDCI BN38A-0B adapter and BN23G-xx SCSI cable, North America	166505-001
	Same as above, International	166505-B31
	Same as above, Japan	166505-291

DLT/SDLT Tape Drives (Internal)	Select one DLT/SDLT tape device The following DLT/SDLT tape drives are supported with 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapters
	DLT8000 40/80-GB tape drive	146196-B22
	SDLT 110/220-GB 3U/5U tape drive	192106-B25
	SDLT 160/320-GB 3U/5U tape drive, carbon black	257319-B21


DLT/SDLT Tabletop Tape Drives	SDLT tabletop 110/220-GB external tape drive, carbon black - TruCluster support restricted to non-shared buses only - U.S.		192103-002
	Same as above – International		192103-B32
	Same as above – Japan		192103-292

	SDLT tabletop 160/320-GB external tape drive, carbon black, U.S.		257319-001
	Same as above, International		257319-B31
	Same as above, Japan		257319-291

	Rackmount kit for H9Axx M-Series cabinets – required for mounting MSL5000 series in M-Series cabinets		254795-001

	MSL5026DLX, DLT tabletop library with one 40/80-GB DLT tape drive, LVD		231821-B21
	MSL5026DLX, DLT tabletop library with two 40/80-GB DLT tape drives, LVD		231821-B22
	MSL5026DLX or MSL5026SL, DLT/SDLT rackmount library, 0 drives; requires rackmount kit (254795-001)		231979-B21
	MSL5026DLX, DLT rackmount library with one 40/80-GB DLT tape drive, LVD; requires rackmount kit (254795-001)		231891-B21
	MSL5026DLX, DLT rackmount library with two 40/80-GB DLT tape drives, LVD; requires rackmount kit (254795-001)		231891-B22

	MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD		302511-B21
	MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drives, LVD		302511-B22
	MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD; requires rackmount kit (254795-001)		302512-B21
	MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD; requires rackmount kit (254795-001)		302512-B22

	MSL5026S2, SDLT2 tabletop library with one 160/320-GB SDLT tape drive, LVD		293-473-B21
	MSL5026S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD		293473-B22
	MSL5026S2 SDLT rackmount library, 0 drives, LVD – requires rackmount kit (254795-001)		293472-B21
	MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive, LVD		293472-B22
	MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD		293472-B23
	MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive with Fibre Channel, LVD		293472-B24
	MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD		293472-B25

	MSL5052SL SDLT tabletop library with two 110/220-GB drives, LVD		249490-B21
	MSL5052SL SDLT rackmount library, 0 drives, LVD – requires rackmount kit (254795-001)		255102-B21
	MSL5052SL SDLT rackmount library with two 110/220-GB drives, LVD – requires rackmount kit (254795-001)		249491-B21
	MSL5052SL SDLT 110/220-GB drive field upgrade, LVD		231823-B22

	MSL5052S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD, graphite		293476-B21
	MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD		293474-B21
	MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD		293474-B24

DLT/SDLT Tape Libraries	ESL9198SL SDLT tape library with four 110/220-GB SDLT tape drives, 198 slots		234618-B21
	ESL9198SL SDLT tape library with eight 110/220-GB SDLT tape drives, 198 slots		234618-B22

	ESL9322S2 SDLT2 tape library, two 160/320-GB SDLT tape drives, 222 slots		293409-B22
	ESL9322S2 SDLT2 tape library, eight 160/320-GB SDLT tape drives, 222 slots		293409-B28
	ESL9322S2 SDLT2 tape library, two 160/320-GB SDLT tape drives, 322 slots		293410-B22
	ESL9322S2 SDLT2 tape library, eight 160/320-GB SDLT tape drives, 322 slots		293410-B28

	ESL9326SL SDLT tape library with six 110/220-GB SDLT tape drives, LVD		234615-B21
	ESL9326SL SDLT tape library with eight 110/220-GB SDLT tape drives, LVD		234615-B22
	ESL9326SL SDLT tape library with 16 110/220-GB SDLT tape drives, LVD		234615-B26

	ESL9595S2 SDLT2 tape library, two 160/320-GB SDLT tape drives, 400 slots		293411-B22
	ESL9595S2 SDLT2 tape library, 16 160/320-GB SDLT tape drives, 400 slots		293411-B28
	ESL9595S2 SDLT2 tape library, two 160/320-GB SDLT tape drives, 500 slots		293412-B22
	ESL9595S2 SDLT2 tape library, 16 160/320-GB SDLT tape drives, 500 slots		293412-B28
	ESL9595S2 SDLT2 tape library, two 160/320-GB SDLT tape drives, 595 slots		293413-B22
	ESL9595S2 SDLT2 tape library, 16 160/320-GB SDLT tape drives, 595 slots		293413-B28

	ESL9595SL SDLT tape library, 0 drives, 400 slots		274672-B21
	ESL9595SL SDLT tape library, 2 drives, 400 slots		274672-B22
	ESL9595SL SDLT tape library, 16 drives, 400 slots		274672-B28
	ESL9595SL SDLT tape library, 0 drives, 500 slots		281627-B21
	ESL9595SL SDLT tape library, 2 drives, 500 slots		281627-B22
	ESL9595SL SDLT tape library, 16 drives, 500 slots		281627-B28
	ESL9595SL SDLT tape library, 0 drives, 595 slots		281628-B21
	ESL9595SL SDLT tape library, 2 drives, 595 slots		281628-B22
	ESL9595SL SDLT tape library, 16 drives, 595 slots		281628-B28
	NOTE: The following options are supported with 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapters.

3U Rackmount Tape Drive Enclosure	3U LVD Rackmount Tape Drive Enclosure for use in H9Axx M-Series Cabinets, 0 drives, carbon black		274338-B21
	Rackmount Kit for H9Axx M-Series Cabinets, carbon black – required for mounting 3U Rackmount Tape Drive Enclosure in M-Series cabinet		3R-A3804-AA
	NOTE: The 3U Rackmount Tape Enclosure supports up to four internal half-height removable devices, or up to two full-height devices; select up to four AIT or DAT devices or two DLT/SDLT devices with 3U Rackmount Tape Enclosure (274338-B21) or select one of the preconfigured configurations listed below.
	AIT 35/70-GB 3U tape drive, carbon black		216884-B21
	AIT 50/100-GB 3U tape drive, carbon black, (157766-B22)		3R-A3753-AA
	DAT 20/40-GB 3U tape drive, carbon black, 157769-B22)		3R-A3752-AA
	DLT8000 40/80-GB tape drive		146196-B22
	SDLT 110/220-GB tape drive		192106-B25
	SDLT 160/320-GB tape drive, carbon black		257319-B21
	Preconfigured configurations
		AIT 50-GB 3U rackmount kit, carbon black	274333-B21
		DLT 40/80-GB, 3U rackmount kit, carbon black	274332-B21
		DLT 40/80-GB, dual-drive, 3U rackmount kit, carbon black	274335-B21
		SDLT 110/220-GB, 3U rackmount kit, carbon black	274331-B21
		SDLT 110/220-GB, dual-drive, 3U rackmount kit, carbon black	274334-B21


5U Rackmount Tape Drive Enclosure	5U LVD Rackmount Tape Drive Enclosure for use in H9Axx M-Series Cabinets, 0 drives, carbon black		274339-B21
5U Rackmount Tape Drive Enclosure	Rackmount Kit for H9Axx M-Series Cabinets, carbon black - required for mounting 5U Rackmount Tape Drive Enclosure in M-Series Cabinet		254795-001
	NOTE: The 5U Rackmount Tape Enclosure supports four full-height removable devices; select up to four DLT or SDLT devices with 5U Rackmount Tape Enclosure (274339-B21) or select one of the preconfigured configurations listed below.
	DLT8000 40/80-GB tape drive		146196-B22
	SDLT 110/220-GB tape drive		192106-B25
	SDLT 160/320-GB tape drive, carbon black		257319-B21
	Preconfigured configurations
		SDLT 110/220-GB Tape Array III, 5U rackmount kit, carbon black	274336-B21
		DLT 40/80-GB Tape Array III, 5U rackmount kit, carbon black	274337-B21
		DLT Tape Array III, Model 0 enclosure, U.S.	168047-001
		Same as above, International	168047-B31
		Same as above, Japan	168047-291

Step 11b –Modular Data Routers
Network Storage Routers	NOTE: The following Network Storage Routers are supported with MSL5000 and ESL9000 tape libraries:
	NSR M2402 Two Fibre Channel x 4 HVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS (262654-B21)		3R-A3741-AA
	NSR M2402 Two Fibre Channel x 4 LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS (262653-B21)		3R-A3740-AA
	NSR e1200 One Fibre Channel x 2 LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, carbon black (262672-B21)		3R-A3746-AA
	NSR e2400 Two Fibre Channel x 4 LVD FC to SCSI Data Router with card cage, Tru64 UNIX and OpenVMS, carbon black (262665-B21)		3R-A3935-AA
	NSR e2400 Two Fibre Channel x 4 LVD FC to SCSI Data Router with no card cage, Tru64 UNIX and OpenVMS, carbon black (262664-B21)		3R-A3745-AA
	NSR N1200 One Fibre Channel x 2 LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, supports tape drives and tape libraries (280823-B21)		3R-A3747-AA


Step 11c – External Storage Solutions/Controllers
	Enterprise Virtual Array Model 2C6D-B 60-Hz, includes 41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, six M5214 dual-redundant FC loop 14-bay drive enclosures, four 12-port FC loop switches; requires DS-KGPSA-xx (283198-B21)	DS-SV110-JA
	Enterprise Virtual Array Model 2C6D-B 50-Hz, includes 41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, six M5214 dual-redundant FC loop 14-bay drive enclosures, four 12-port FC loop switches; requires DS-KGPSA-xx (283198-B22)	DS-SV110-JB
	Enterprise Virtual Array Model 2C12D-B 60-Hz, includes 41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 12 M5214 dual-redundant FC loop 14-bay drive enclosures, four 12-port FC loop switches; requires DS-KGPSA-xx, (283199-B21)	DS-SV110-KA
	Enterprise Virtual Array Model 2C12D-B 50-Hz, includes 41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 12 M5214 dual-redundant FC loop 14-bay drive enclosures, four 12-port FC loop switches; requires DS-KGPSA-xx (283199-B22)	DS-SV110-KB
	Enterprise Virtual Array Model 8C8D 60-Hz, includes 41U graphite storage cabinet, four M3220 controller assembly with eight HSV110 controllers, eight M5214 dual FC loop 14-bay drive enclosures; requires DS-KGPSA-xx (283263-B21)	DS-SV110-LA
	Enterprise Virtual Array Model 8C8D 50-Hz, includes 41U graphite storage cabinet, four M3220 controller assembly, with eight HSV110 controllers, eight M5214 dual FC loop 14-bay drive enclosures; requires DS-KGPSA-xx (283263-B22)	DS-SV110-LB
	Enterprise Virtual Array Model 0C6D-B 60-Hz, includes 41U graphite storage cabinet, six M5214 dual-redundant FC loop 14-bay drive enclosures, 12 16.4-feet/5-meter interconnect cables (to 2C12D-B); requires DS-KGPSA-xx (283264-B21)	DS-SV110-MA
	Enterprise Virtual Array Model 0C6D-B 50-Hz, includes 41U graphite storage cabinet, six M5214 dual-redundant FC loop 14-bay drive enclosures, 12 16.4-feet/5-meter interconnect cables (to 2C12D-B); requires DS-KGPSA-xx (283264-B22)	DS-SV110-MB
	Enterprise Virtual Array Model 0C12D-B 60-Hz, includes 41U graphite storage cabinet, 12 M5214 dual-redundant FC loop 14-bay drive enclosures, 24 16.4-feet/5-meter interconnect cables (to two 2C12D-Bs); requires DS-KGPSA-xx (283265-B21)	DS-SV110-NA
	Enterprise Virtual Array Model 0C12D-B 50-Hz, includes 41U graphite storage cabinet, 12 M5214 dual-redundant FC loop 14-bay drive enclosures, 24 16.4-feet/5-meter interconnect cables (to two 2C12D-Bs); requires DS-KGPSA-xx (283265-B22)	DS-SV110-NB

SAN Solutions Kits	Tru64 UNIX SAN Solutions Kit for Enterprise Virtual Array V2.0 (250193-B22) NOTE: V5.1 requires Patch Kit 3: T64V51B19AS0005-20020411.tar V5.1A requires Patch Kit 3: T64V51AB03AS0003-20020827.tar.	QB-6RPAB-SB
	OpenVMS SAN Solutions Kit for Enterprise Virtual Array V2.0 (250194-B22) NOTE: V7.2-2 requires Tima Kit: DEC-AXPVMS-VMS722_FIBRE_SCSI-V0200 V7.3 requires Tima Kit: DEC-AXPVMS-VMS73_FIBRE_scsi-V0300.	QB-6RPAC-SB

Fibre Channel Controller	Fibre Channel Controller (HSG80), includes 256-MB cache, requires the following firmware: 8.6-4F ACS FW (222318-B22, QB-6BUAA-SD), one per controller 8.6-4S ACS FW (222364-B22, QB-6ENAA-SC), one per controller 8.6-4P ACS FW (222316-B22, QB-6CAAA-SD), one per controller Requires Tru64 UNIX software: 222320-B23, QB-65RAB-SE, one per controller Requires OpenVMS software: 222321-B22, QB-65RAC-SD, one per controller	DS-HSG80-BK
	Additional 256-MB cache for HSG80 (380674-B21)	DS-HSDIM-AC
	Single cache battery, one per HSG80 controller (135823-B21)	DS-SE2CS-CB
	Model 2200 controller shelf for HSG80 controller (DS-SE2ZS-C8)	135820-B21

StorageWorks Disk Array Family	NOTE: The HP StorageWorks Disk Array Family, specifically the XP128 and XP1024, are now supported on AlphaServer ES45 systems. For product and ordering information, refer to the following Web pages: http://www.hp.com/products1/storage/ products/disk_arrays/ highend/xp1024/index.html http://www.hp.com/products1/storage/ products/disk_arrays/ highend/xp128/index.html The following part numbers have been assigned for reference purposes only:

	3R-A4417-AA	A7876A	XP128 Disk Array Control Frame
	3R-A4418-AA	A7906A	XP1024 Disk Array Control Frame


Step 11d – Fibre Channel Options
		The following disk drives, hubs, data routers, switches, and cables are used in Fibre Channel configurations using the DS-KGPSA-xx adapter.

Fibre Channel Disk Drives		36-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (2.54 cm) drive (238590-B21)	3R-A3239-AA
		36-GB 15K rpm dual-port 2-Gb/sec FC-AL 1-inch (2.54 cm) drive (236205-B21)	3R-A3210-AA
		72-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (2.54 cm) drive (238921-B21)	3R-A3260-AA

Fibre Channel Hubs		Fibre Channel 7-port Storage Hub, International (Tru64 UNIX only) (234453-B31)	DS-SWXHB-17
		Fibre Channel 7-port Storage Hub, Japan (Tru64 UNIX only) (234453-291)	DS-SWXHB-J7

Fibre Channel Data Routers		1 Fibre Channel x 2 HVD data router (163082-B21)	3R-A2673-AA
		1 Fibre Channel x 2 LVD data router (163083-B21)	3R-A2774-AA
		2 x 4 LVD Fiber Channel to SCSI Network Storage Router (262653-B21)	3R-A3740-AA
		2 x 4 HVD Fiber Channel to SCSI Network Storage Router (262654-B21)	3R-A3741-AA

Fibre Channel Switches	Fibre Channel 2-Gb 8-port SAN switch (258707-B21)		DS-DSGGD-AC
	Fibre Channel 2-Gb 16-port SAN switch (283056-B21)		DS-DSGGD-AD
	Fibre Channel 2-Gb SAN switch – 16-port; requires Tru64 UNIX V5.1A Patch Kit: T64V51AB01AS0001-20020116.tar (287055-B21)		DS-DSGGD-BA
	Fibre Channel 2-Gb 64-port Core Switch (254508-B21)		DS-DSGGE-AB

McData 64-port Fibre Channel SAN Director Class Switches	SAN Director 64 (1 GB) 32 ports, base model		DS-DMGGD-AA
	SAN Edge Switch 2 Gb, 32 ports		DS-DMGGE-BC
	SAN Edge Switch 2 Gb, 16-ports		DS-DMGGE-BB
	NOTE: Connection for, or between, 1-Gb and/or 2-Gb SAN switches requires different cables. Refer to the Switches, Hubs, and Interconnects QuickSpecs at: http://www.compaq.com/products/quickspecs/ North_America/10490.html

Fibre Channel Cables	NOTE: The following LC-SC connector cables support connectivity between 1-Gb and 2-Gb devices.
	2-meter LC-SC multi-mode Fibre Channel cable (221691-B21)		3R-A2976-AA
	5-meter LC-SC multi-mode Fibre Channel cable (221691-B22)		3R-A2977-AA
	15-meter LC-SC multi-mode Fibre Channel cable (221691-B23)		3R-A2978-AA
	30-meter LC-SC multi-mode Fibre Channel cable (221691-B26)		3R-A3458-AA
	50-meter LC-SC multi-mode Fibre Channel cable (221691-B27)		3R-A3459-AA
	NOTE: The following LC-LC connector cables support connectivity between 2-Gb and 2-Gb devices.
	2-meter LC-LC multi-mode Fibre Channel cable (221692-B21)		3R-A2979-AA
	5-meter LC-LC multi-mode Fibre Channel cable (221692-B22)		3R-A2980-AA
	15-meter LC-LC multi-mode Fibre Channel cable (221692-B23)		3R-A2981-AA
	30-meter LC-LC multi-mode Fibre Channel cable (221692-B26)		3R-A3454-AA
	50-meter LC-LC multi-mode Fibre Channel cable (221692-B27)		3R-A3455-AA

Step 12 - Graphics Adapters - Optional
Select graphics adapter, monitor, and country-specific keyboard for Tru64 UNIX and OpenVMS systems if required

		Maximum # Supported
		Tru64 UNIX	OpenVMS	PCI/AGP Slot
2D Graphics	3Dlabs Oxygen VX1 32-MB PCI 2D graphics accelerator; can operate in all slots; for best performance, use 66-MHz slots. Linux-supported option; maximum one per system NOTE: Only VX1 cards may be used in a multi-head environment.	4	4	3.3/5 V	66 MHz	SN-PBXGF-AB
	3Dlabs Oxygen VX1 32-MB AGP 2D graphics accelerator; AGP can only operate in Model 1B or Model 1 in slot 3; requires Tru64 UNIX V5.1A with NHD-4; requires OpenVMS V7.3-1; no TruCluster support. NOTE: Only VX1 cards may be used in a multi-head environment.	4 (1 AGP3 PCI)	4 (1 AGP3 PCI)	1.5 V	4X	SN-PBXGF-BC
	PCI 32-bit, 33-MHz multi-function (single-port 10/100 Ethernet UTP/RJ45, Ultra2 LVD SCSI, and 2D graphics) adapter. Model 1 or 1B requires installation on PCI Bus 0 in slots 1 or 2; Model 2 or 2B 1B requires installation on PCI Bus 0 in slots 3, 6, 9, or 10. NOTE: Tru64 UNIX V5.1A requires Patch Kit 3: T64V51AS0003-20010413.tar Only one 3X-KZPEA-DB allowed on same PCI bus; no multi-head graphics support; TruCluster support restricted to non-shared SCSI buses only. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	1	1	5V	33MHz	3X-DEPVZ-AA
3D Graphics	PowerStorm 300 3D multi-head graphics accelerator with 15-MB frame buffer memory and 16-MB texture memory; use in slots 3, 6, 9, or 10. NOTES: Only PowerStorm cards may be used in a multi-head environment. 3X-KZPEA-DB adapter requires 54-25563-01 be at minimum Rev C06 when installing 3X-KZPEA-DB on same PCI bus.	4	4	5 V	33 MHz	SN-PBXGD-AD
	PowerStorm 350 3D multi-head graphics accelerator with 30-MB frame buffer memory and 32-MB texture memory; use in slots 3, 6, 9, or 10. NOTES: Only PowerStorm cards may be used in a multi-head environment. 3X-KZPEA-DB adapter requires 54-25563-01 be at minimum Rev B05, or 54-25563-02 be at minimum Rev A03, when installing 3X-KZPEA-DB on same PCI bus.	4	4	5 V	33 MHz	SN-PBXGD-AE


Step 13- Monitors - Optional
Graphics monitors other than those listed can be used if compatible with SVGA graphics ordered with system.
A video cable, 6-foot/1.8-meter length, is included with all variants of monitors.
Video extension cable required if monitor is located more than 1.5-meter from system.
Monitors will ship with, but not be integrated with systems.
Carbon/Silver Monitors	V7550 17-inch (16-inch viewable image size) flat-faced shadow mask color monitor, two-tone (carbon/silver), 0.25mm dot pitch, VGA to 1024 x 768 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with NA power cord, VGA cable	3R-A4002-AA
	Same as above, with Euro power cord	3R-A4201-AA
	Same as above, APD, no power cord	3R-A4202-AA
	Same as above, with PRC power cord, CCIB	3R-A4446-AA
	Same as above, Southern Hemisphere, with Australia/New Zealand power cord	3R-A4203-AA

	P930 19-inch (18-inch viewable image size) auto-scanning color monitor, Diamondtron NF, 0.24-mm aperture grille pitch, VGA to 1600 x 1200 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with NA power cord, VGA cable	3R-A4215-AA
	Same as above, with Euro power cord	3R-A4391-AA
	Same as above, Taiwan, with NA power cord	3R-A4392-AA
	Same as above, with PRC power cord, CCIB	3R-A4394-AA
	Same as above, Southern Hemisphere, 0.25 to 0.27 mm aperture grille pitch, with Australia/New Zealand power cord	3R-A4393-AA

	P1130 21-inch (19.8–inch viewable image size) FD Trinitron auto-scanning color monitor, 0.24-mm aperture grille pitch, VGA to 1792 x 1344 @85Hz, dual video input, USB Hub, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with NA power cord, VGA cable	3R-A4216-AA
	Same as above, with Euro power cord	3R-A4396-AA
	Same as above, Taiwan, with NA power cord	3R-A4397-AA
	Same as above, with PRC power cord, CCIB	3R-A4400-AA
	Same as above, Southern Hemisphere, with Australia/New Zealand power cord	3R-A4398-AA

Carbon/Silver Flat Panel Monitors	TFT1825, 18-inch (18-inch viewable image size) TFT flat panel monitor, 0.28mm pixel pitch, 1600 x 1200 @60Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, one VGA, one DVI-I input connector, NA power cord, VGA, and DVI-I cables	3R-A4292-AA
	TFT1520, 15-inch (15-inch viewable image size) TFT flat panel monitor, 0.297 mm pixel pitch, 1024 x 768 @75 Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, two video input connectors (one VGA and one DVI-I), NA power cord, VGA and DVI-I cables	3R-A4249-AA

Video Extension Cable	6-foot/1.8-meter video extension cable	BN39C-02

Monitor Power Cords	North America	BN26J-1K
	Australia, New Zealand, 2.5-meter (103541-011)	BN19H-2E
	Central Europe, 2.5-meter	BN19C-2E
	Denmark, 2.5-meter (103541-481)	BN19K-2)
	Egypt, India, South Africa, 2.5-meter (103541-AR1)	BN19S-2E
	Israel, 2.5-meter	BN18L-2E
	Italy, 2.5-meter (103541-461)	BN35M-02
	Japan, 2.5-meter, Dentori approved	3X-BN46F-02
	Republic of China (103541-001)	BN19H-2E
	Switzerland, 2.5-meter (103541-511)	BN19E-2E
	UK, Ireland, 2.5-meter	BN19A-2E

Step 14 - Keyboards, Mouse, and Documentation – Optional
Step 14a - Keyboards
Select country-specific keyboard or mouse only if required All keyboards listed may not be available in all geographies Select an opal OpenVMS keyboard for use with VT5xx text terminals

	Opal (for VT5xx)	Carbon
Keyboard/Language	OpenVMS	Tru64 UNIX/Linux	OpenVMS
U.S./English keyboard	LK461-A2	3R-LKQ48-BA	3X-LK462-A2
Arabic keyboard	-	3R-LKQ48-BR	-
Belgian keyboard	LK461-AB	3R-LKQ48-AB	3X-LK462-AB
BHCSY keyboard	-	3R-LKQ48-AX	-
Canadian/English keyboard	LK461-AQ	-	3X-LK462-AQ
Canadian/French keyboard	LK461-AC	3R-LKQ48-AC	3X-LK462-AC
Cyrillic keyboard (Russian)	LK461-BT	3R-LKQ48-BT	3X-LK462-BT
Czech keyboard	LK461-BV	3R-LKQ48-BV	3X-LK462-BV
Danish keyboard	LK461-AD	3R-LKQ48-AD	3X-LK462-AD
Dutch keyboard	LK461-AH	3R-LKQ48-AH	3X-LK462-AH
Finnish keyboard	LK461-AF	3R-LKQ48-AF	3X-LK462-AF
French keyboard	LK461-AP	3R-LKQ48-AP	3X-LK462-AP
German keyboard	LK461-AG	3R-LKQ48-AG	3X-LK462-AG
Greek keyboard	LK461-BH	3R-LKQ48-BH	3X-LK462-BH
Hebrew keyboard	LK461-AT	3R-LKQ48-AT	3X-LK462-AT
Hungarian keyboard	LK461-BQ	3R-LKQ48-BQ	3X-LK462-BQ
International keyboard	-	3R-LKQ48-BA	-
Italian keyboard	LK461-AI	3R-LKQ48-AI	3X-LK462-AI
Japanese keyboard	-	3R-LKQ48-AJ	-
Korean keyboard	-	3R-LKQ48-BK	-
Latin-American keyboard	-	3R-LKQ48-AR	-
Norwegian keyboard	LK461-AN	3R-LKQ48-AN	3X-LK462-AN
Polish keyboard	LK461-BP	3R-LKQ48-BP	3X-LK462-BP
Portuguese keyboard	LK461-AV	3R-LKQ48-AV	3X-LK462-AV
Romanian keyboard	LK461-BL	-	3X-LK462-BL
Simplified Chinese keyboard	-	3R-LKQ48-CV	-
Slovak keyboard	LK461-CZ	3R-LKQ48-CZ	3X-LK462-CZ
Spanish keyboard	LK461-AS	3R-LKQ48-AS	3X-LK462-AS
Swedish keyboard	LK461-AM	3R-LKQ48-AM	3X-LK462-AM
Swiss/French keyboard	LK461-AK	3R-LKQ48-AK	3X-LK462-AK
Swiss/German keyboard	LK461-AL	-	3X-LK462-AL
Traditional Chinese keyboard	-	3R-LKQ48-BI	-
Thai keyboard	-	3R-LKQ48-CB	-
Turkish Q keyboard	LK461-BU	3R-LKQ48-BU	3X-LK462-BU
Turkish/F keyboard	LK461-BW	-	3X-LK462-BW
UK keyboard	-	3R-LKQ48-AE	-
Yugoslavian keyboard	LK461-BY	-	3X-LK462-BY


Step 14b - Mouse
Mouse		3-button mouse – carbon		3R-A3480-AA

Keyboard or Mouse Extension Cable		6-foot/1.8-meter keyboard or mouse extension cable – to extend both keyboard and mouse order two cables	3X-BC34A-06

Step 14c - Documentation
Documentation	Additional ES45 System Information Kit (includes Owners Guide, print and CD)			QA-6NUAB-G8

Step 15 - Console Terminal - Optional
	Any terminal can be used as a console device
	Third-party console devices require an EIA-232 25-pin DSUB connector
	VT510 video terminal; requires keyboard, H8575-x adapter, and BC16E-x cable			VT510-xx
	Console cable, female connector (25-pin passive adapter)			H8575-A
	Console cable, male connector (adapter with EOS, ESD, 25 POS D-SUB)			H8575-D

Step 16 - Software - Media and documentation required for first system on site
Software Processor Code = E
Tru64 UNIX	AlphaServer ES45 Tru64 UNIX systems include Unlimited User license, Server Extension license, Internet Express, and Secure Web Server

When using Tru64 UNIX V5.1A	Tru64 UNIX media and online documentation on CD-ROM			QA-6ADAA-H8
	Tru64 UNIX full hard copy documentation			QA-6ADAA-GZ
	TruCluster Plus Software Package, licenses for TruCluster Server, Logical Storage Manager and AdvFS Utilities			QP-6R9AE-AA
	TruCluster Server License			QL-6BRAE-AA
	Logical Storage Manager License			QL-2GVAE-AA
	AdvFS Utilities License			QL-0EGAE-AA
	Advanced Server for Tru64 UNIX, 25 client concurrent use license			QL-5U29M-3D
	Advanced Server for Tru64 UNIX, 50 client concurrent use license			QL-5U29M-3E
	Advanced Server for Tru64 UNIX, 100 client concurrent use license			QL-5U29M-3F
	Advanced Server for Tru64 UNIX, 250 client concurrent use license			QL-5U29M-3G
	Advanced Server for Tru64 UNIX, 500 client concurrent use license			QL-5U29M-3H
	Layered products media and documentation for Tru64 UNIX on CD-ROM			QA-054AA-H8
	DECnet/OSI extended function license for Tru64 UNIX			QL-MTKAE-AA
	DECnet/OSI end-system license for Tru64 UNIX			QL-MTJAE-AA
	Open3D for Tru64 UNIX on CD-ROM, includes graphics drivers			QA-OAFAA-H8
OpenVMS	AlphaServer ES45 OpenVMS systems include Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS Revision V3.1
	AlphaStation ES45 OpenVMS systems include pre-installed software, Base license, Concurrent Use 1-user license, NAS 150 Client license, MMS RT license and Open3D traditional license
	Enterprise Integration Package includes licenses for TCP/IP Services for OpenVMS, DECwindows Motif for OpenVMS Alpha, DECprint Supervisor for OpenVMS Alpha Plus, DECprint Supervisor for OpenVMS Open, DECnet-Plus for OpenVMS Alpha End System, Archive/Backup System for OpenVMS Management Tools, Archive/Backup Agent for Windows NT, OpenVMS Disk Services for Windows NT, Office Server for OpenVMS, PATHWORKS 32, PATHWORKS V6 for OpenVMS – Advanced Server, and DIGITAL Office Server Client Access License
	OpenVMS Concurrent Use licenses provide the right to interactively use the operating system by the specified number of concurrent users on a designated OpenVMS system. OpenVMS Concurrent Use licenses can be moved from one system to another at user discretion and can be shared in a mixed OpenVMS VAX and OpenVMS Alpha cluster.
	OpenVMS Traditional Unlimited Use license is system specific and can only be used on one system at a time. It cannot be shared between systems or in an OpenVMS VAX or OpenVMS Alpha Cluster.
	Concurrent Use 1-user license			QL-MT3AA-3B
	Concurrent Use 2-user license			QL-MT3AA-3C
	Concurrent Use 4-user license			QL-MT3AA-3D
	Concurrent Use 8-user license			QL-MT3AA-3E
	Concurrent Use 16-user license			QL-MT3AA-3F
	Concurrent Use 32-user license			QL-MT3AA-3G
	Concurrent Use 64-user license			QL-MT3AA-3H
	Concurrent Use 128-user license			QL-MT3AA-3J
	Concurrent Use 256-user license			QL-MT3AA-3K
	Traditional unlimited user license			QL-MT2AE-AA
	OpenVMS media and documentation on CD-ROM			QA-MT1AA-H8
	OpenVMS full hard copy documentation			QA-001AA-GZ
	Layered products media and documentation for OpenVMS on CD-ROM, includes Enterprise Integration Server for OpenVMS media and documentation.			QA-03XAA-H8
	DECnet extended function license for OpenVMS			QL-MTGAE-AA
	DECnet end-system to extended function upgrade license for OpenVMS			QL-MTHAE-AA
	OpenVMS Cluster license for Alpha systems			QL-MUZAE-AA
	OpenVMS Volume Shadowing license			QL-2A1AE-AA

Step 17 - Hardware and Software Supplemental Support Services for Tru64 UNIX and OpenVMS - Optional
Select one of the optional CarePaq Priority Service Packages described below that best supports the customer’s operational requirements for system availability.

CarePaq Priority Services	CarePaq Priority Services are available for AlphaServer systems running Tru64 UNIX or OpenVMS operating system. Priority Services are designed for the growing number of customers who need support beyond the basic warranty. It offers six service packages – Warranty Plus, Priority, Priority 24, Priority Silver, Priority Gold, and Priority Executive with coverage for both Principal servers systems and SSPs (Subsequent System Packages) - that meet a full range of customer support requirements.

Program Features – Principal Server
Warranty Plus	9 x 5 HW/SW support
	Next Business Day on-site hardware support
	2-hour response for Bronze software support
	License Subscription for HP O/S software and embedded L/P (unlimited users and server extensions for Tru64 UNIX)

Priority	9 x 5 HW/SW support
	4-hour response on-site hardware support
	2-hour response for Bronze software support
	License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
	Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)

Priority 24	24 x 7 HW/SW support
	Named HW engineer
	4-hour response on-site hardware support
	2-hour response for Bronze software support
	License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users and server extensions for Tru64 UNIX)
	Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)

Priority Silver	24 x 7 HW Support. Named Engineer, 4-hour response
	24 x 7 Silver SW Support - Named Account Rep, 1-hour response Monday – Friday, 8AM-5PM local time; 2-hour response remaining hours
	License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
	Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)
	Technical newsletter and SW activity review
	Proactive Patch Notification
	One System Healthcheck per year

Priority Gold	24 x 7 HW support with Named Engineer, 4-hour response for on-site support
	24 x 7 Gold SW support - Named Account Rep
	30-minute callback (critical); 1-hour callback (non-critical)
	License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
	Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)
	Technical newsletter, SW activity review and 10 hrs Upgrade impact planning
	Proactive Revision Management
	Two System Healthchecks per year
	Mandatory pre-qualification required

Priority Gold Executive	24 x 7 HW support with Named Engineer, 2-hour response for on-site support
	24 x 7 Gold SW support - Named Account Rep
	30-minute callback (critical); 1-hour callback (non-critical)
	License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
	Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)
	Technical newsletter, SW activity review and 10 hrs Upgrade impact planning
	Proactive Revision Management
	Two System Healthchecks per year
	Customer site must be within 25 miles of a HP service location
	Mandatory pre-qualification required

Program Features – Additional Services
SSPs (Subsequent System Packages)	For Priority, Priority 24, Priority Silver, Priority Gold, and Priority Gold Executive
	HW Support at same level as corresponding package for Principal server
	License Subscription: HP O/S (where applicable)
	Telephone support through Principal server covered by full support package

Installation	Preinstallation review
	Unpacking of equipment
	Assemble and test
	Basic product usage info
	No software installation added

Installation & Startup HP O/S	Preinstallation review
	Unpacking of equipment
	Assemble and test
	Basic product usage info
	Install operating systems
	Product configuration
	Print & network access
	Orientation

Model/CarePaq Priority Service	Principal Server 1 year	Principal Server 3 years	Subsequent Systems 1 year	Subsequent Systems 3 years
AlphaServer ES45 Model 2
Warranty Plus	Not available	FP-F00EB-36	Not available	Not available
Priority	FP-F01EB-12	FP-F01EB-36	FP-F21EB-12	FP-F21EB-36
Priority 24	FP-F02EB-12	FP-F02EB-36	FP-F22EB-12	FP-F22EB-36
Priority Silver	FP-F04EB-12	FP-F04EB-36	FP-F24EB-12	FP-F24EB-36
Priority Gold	FP-F08EB-12	FP-F08EB-36	FP-F28EB-12	FP-F28EB-36
Priority Gold Executive	FP-F09EB-12	FP-F09EB-36	FP-F29EB-12	FP-F29EB-36
Installation	FP-FINST-EB	FP-FINST-EB	FP-FINST-EB	FP-FINST-EB
Installation & Startup	FP-FSTAR-EB	FP-FSTAR-EB	FP-FSTAR-EB	FP-FSTAR-EB


NOTES: AlphaServer ES45 systems include one-year parts and labor warranty with 5x9, on-site Next Business Day response. Priority Services include support for new HP branded hardware options internal to the AlphaServer enclosure plus a monitor (17-inch or less excluding flat panel models). External storage devices/cabinets carry their own level of warranty and should be quoted separately for uplifted warranty services. Five-year CarePaq Priority Service is available upon request. To quote five-year service, change the last two part number digits from 12 or 36 to 60. In addition to the CarePaq Priority Services, uplifted warranty Supplemental Services are available for separate hardware and software support. For more information on Hardware and Software Supplemental Services and other HP service options available for AlphaServers, please consult your Sales Account Manager or visit: http://www.hp.com/hps/ NOTE: This website is available in English only.

Step 18 - Hardware Supplemental Support Services for Linux - Optional
Hardware - Americas and Asia Pacific Only	Systems include three-year hardware warranty, onsite with 5 x 9, 24-hour response time
	Options ordered as part of initial system sale take on warranty of the enclosure
	Options added after initial system sale take on warranty of the enclosure until enclosure warranty ends
	All unique ES45 options have a minimum of one-year Return to Hewlett-Packard Warranty
	Select optional Hardware Supplemental Support Services if required
	Supplemental Service for ES45 Tower System	Model 1	Model 2
	3-year, 5 x 9, 4-hour response time	FM-4T4HR-36	FM-4Q4HR-36
	5-year, 5 x 9, 4-hour response time	FM-4T4HR-60	FM-4Q4HR-60
	3-year, 7 x 24, 4-hour response time	FM-4T724-36	FM-4Q724-36
	5-year, 7 x 24, 4-hour response time	FM-4T724-60	FM-4Q724-60
	5-year, 5 x 9, next day, on-site	FM-4TXHW-60	FM-4QXHW-60
	Supplemental Service for ES45 Pedestal System	Model 1	Model 2
	3-year, 5 x 9, 4-hour response time	FM-4F4HR-36	FM-4G4HR-36
	5-year, 5 x 9, 4-hour response time	FM-4F4HR-60	FM-4G4HR-60
	3-year, 7 x 24, 4-hour response time	FM-4F724-36	FM-4G724-36
	5-year, 7 x 24, 4-hour response time	FM-4F724-60	FM-4G724-60
	5-year, 5 X 9, next day, on-site	FM-4FXHW-60	FM-4GXHW-60
	Installation Services	Model 1	Model 2
	Hardware product installation for ES45 Tower System	FM-4TINS-IN	FM-4QINS-IN
	Hardware product installation for ES45 Pedestal System	FM-4FINS-IN	FM-4GINS-IN

	Add-on memory installation for ES45		FM-64MEM-IN
	Add-on SMP CPU installation for ES45		FM-64CPU-IN
	NOTE: Add-on installation part numbers should be used when options are added to existing systems.

Hardware—Europe Only	Europe does not offer specific part numbers for Hardware Supplemental Support Services. Prices are quoted based on worldwide service reference pricing. Contact MCS Sales in your country for information on Hardware Supplemental Support Services.

Overview Standard Features Systems/Options Options TechSpecs

TechSpecs

Tower Configuration	Dimensions (H x W x D)	20 x 15.25 x 31.7 in/50.8 x 38.7 x 80.5 cm
	Shipping Dimensions	32.2 x 24 x 40 in/82.48 x 60.2 x 101.6 cm
	Weight	Typical Configuration		144.3 lb/65.6 kg
		Maximum Configuration		212.8 lb/96.7 kg
	Shipping Weight	Typical Configuration		172 lb/78 kg
		Maximum Configuration		242 lb/110 kg
		Clearances	Operating		Service
		Front	29.5 in/75 cm		29.5 in/75 cm
		Rear	6 in/15 cm		29.5 in/75 cm
		Left Side	None		29.5 in/75 cm
		Right Side	None		None

Pedestal Configuration	Dimensions (H x W x D)	30.8 x 20 x 32.4 in/78.2 x 50.8 x 82.3 cm
	Shipping Dimensions	42.4 x 39.5 x 23.9 in/107.7 x 100.3 x 60.7 cm
	Weight	Typical Configuration		280 lb/127 kg
		Maximum Configuration		350 lb/159 kg
	Shipping Weight	Typical Configuration		328 lb/149 kg
		Maximum Configuration		407 lb/185 kg
		Clearances	Operating		Service
		Front	29.5 in/75 cm		29.5 in/75 cm
		Rear	6 in/15 cm		29.5 in/75 cm
		Left Side	None		None
		Right Side	None		29.5 in/75 cm

Rackmount System	Dimensions (H x W x D)	13.87 x 17.6 x 30.8 in/35.2 x 44.7 x 78.2 cm (fits 14 in [8U] standard RETMA cabinet)
	Shipping Dimensions	28.8 x 24 x 40 in/73.2 x 60.7 x 101.6 cm
	Weight	When lifting:		Typical Configuration		110 lb/50 kg
				Maximum		167.2 lb/76 kg
		Total added to cabinet (brackets, slides, cables):		Typical Configuration		130 lb/59 kg
				Maximum		202.4 lb/92 kg
	Shipping Weight	Typical Configuration		158 lb/72 kg
		Maximum		233 lb/106 kg
	Clearances	Operating		Service
		See specific cabinet requirements		Minimum 4 ft/121.9 cm, 32.4 in/82.2 cm withdrawal on rails


Cabinet Configuration		H9A10 M-Series		H9A15 M-Series
	Dimensions (H x W x D) (Depth includes rear door extender)	67x 23.6 x 41.5 in/ 170 x 60 x 105.4 cm		79 x 23.6 x 41.5 in/ 200 x 60 x 105.4 cm
	Shipping Dimensions	73 x 36 x 48 in/ 185.5 x 91.5 x 122 cm		85 x 36 x 48 in/ 216 x 91.5 x 122 cm
	Weight	Configuration dependent		Configuration dependent
	Shipping Weight	Nominal: 946 lb/430 kg Maximum: 1,375 lb/625 kg		Nominal: 1,056 lb/550 kg Maximum: 1,408 lb/640 kg

System Unit	Environmental
	Temperature	Operating (Tower, Pedestal, Rackmount)		50?/font> to 95?/font> F/10?/font> to 35?/font> C
		Non-operating		-40?/font> to 151?/font> F/–40?/font> to 66?/font> C
		Storage (60 days)		-40?/font> to 151?/font> F/–40?/font> to 66?/font> C
		Rate of change		20?/font> F/hr/11?/font> C/hr
		NOTE: Maximum operating temperature at sea level; reduce by 1.8?/font> F (1?/font> C) for each 2,000 ft (600 m) above sea level.
	Humidity	Operating	20% to 80%
		Non-operating	20% to 80%
		Storage (60 days)	10% to 95%
		Rate of change	20% hr
	Maximum Wet Bulb Temperature	Operating	82?/font> F/28?/font> C
		Storage (60 days)	115?/font> F/46?/font> C
	Maximum Dew Point Temperature	Operating	36?/font> F/2?/font> C
	Heat Dissipation		Nominal		Maximum
		Tower and Rack	980W, 3347 BTU/hr		1440W, 4918 BTU/hr
		Pedestal	1560W, 5328 BTU/hr		2400W, 8196 BTU/hr
		H9A10/H9A15 Cabinets	Configuration dependent		4800W, 16392 BTU/hr
	Air Flow and Quality	Intake location	Front
		Exhaust location	Rear Tower, Pedestal, Rack; Rear/top H9A10/H9A15
		Particle size	N/A
		Concentration	N/A
	Altitude (unpressurized)	Operating	10,000 ft/3,048 m
		Non-operating	40,000 ft/12,192 m
		NOTE: Maximum operating temperature at sea level; reduce by 1.8?/font> F (1?/font> C) for each 2,000 ft (600 m) above sea level.


Acoustics (Declared values per ISO 9296 and ISO 7779)
Acoustics			L_Wad,B	L_nAm,dBA (bystander position)
	Tower or Rackmount	Idle	6.4	47
		Operating	6.4	47
	Pedestal	Idle	6.6	48
		Operating	6.6	48
	NOTE: Current values for specific configurations are available, 1 B = 10 dBA.
Vibration	Operating		10 to 500 Hz 0.1 G peak
	Non-operating		1.03 Grms 5-300 Hz

Electrical (Power supplies are universal, PFC, auto ranging, 200–240 VAC)
Nominal Voltage (VAC)	200 to 240
Voltage Range (VAC) temporary condition	180 to 250
Power Source Phase	Single
Nominal Frequency (Hz)	50/60
Frequency Range (Hz)	47 to 53/57 to 63
RMS Current	Tower and Rackmount		Single power cord	5.6A
			Multiple power cords	3.6A
			Maximum VA	1440
	Pedestal		Each power cord	8.6A
			Maximum VA	2070
	M-Series Cabinet (configuration dependent)		Nominal voltage (VAC)	200 to 240
	M-Series Cabinet (configuration dependent)		Each power cord	16A
Power Cords	Tower (mandatory)		Up to 3 (Country specific)	IEC 320 to country-specific
	Pedestal (mandatory)		2 (Country specific)	IEC 320 C13 to country-specific
	Rackmount (included)		3 (14 ft 10 in/52 cm)	IEC 320 C13 to IEC 320 C14
	Cabinet (included)		Up to 4 (10 ft /305 cm)	200-240 V non-removable NEMA L6-20P for North America or 200-240 V non-removable IEC 309


Regulatory	Agency Approvals	UL: Listed to UL1950 3rd edition
		UL CNL: Certified to CAN/CSA-C22.2 No. 950-1995
		TUV: EN 60950/A11:1997, GS marked
		FCC: Part 15.B Class A
		IC ICES-003 Class A
		CE: EN55022:1998, EN55024:1998, EN61000-3-2:1995, EN61000-3-3:1995
		VCCI:V-3/97.04 Class A
		BSMI: CNS13438 Class A
		C-Tick: AS/NZS 3548:1995 Class A
	Reviewed to	AS/NZ 3260:1993 Australian/New Zealand Standard
		EN 60950:2000
		IEC 60950:1999, 3rd edition
		UL 60950, 3rd edition, 2000

?2003 Hewlett-Packard Company

Hewlett-Packard, the Hewlett-Packard logo, AlphaServer, OpenVMS, StorageWorks, CarePaq, Tru64, and TruCluster are trademarks of Hewlett-Packard Company in the U.S. and/or other countries. UNIX is a registered trademark or trademark of The Open Group in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies.

Hewlett-Packard shall not be liable for technical or editorial errors or omissions contained herein. The information is provided ?/font> as is?/font> without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

DA-10994 - U.S. - Version 32 - March 18, 2008