• Modules designed for 5.0V signaling and 33-MHz bus speed can only operate in 5.0V/33-MHz slots
  (slots 5 and 6).
• A maximum total of two 5V modules can be installed in the system.
• Modules designed for 3.3 V signaling and 66-MHz bus speed can only operate in 66-MHz slots
  (slots 1, 2, 3, 4).
• Universal PCI modules can operate in all slots (3.3V and 5.0V).
• Universal PCI modules can operate at a maximum bus speed of 33 MHz or 66 MHz.
• Universal PCI modules operating at 33 MHz placed in a 66-MHz slot will reduce the entire hose to operate at
  33 MHz.
• Universal PCI modules capable of operating at 66 MHz when placed in a 33-MHz slot will operate at
  33 MHz.

The DS25 PCI bus and slot specifications follow:

Voltage

Hot-Plug

Number

• System memory (Step 2a)

• Pedestal/tower or rackmount bezel kit (Step 2b)

• Disk drive cage (Step 2c)

• System disk drive (Step 2d)

• Two power cords (Step 2e)

• Order country-specific keyboard and mouse only if required. (Step 14)

• Software media and documentation for first system onsite. (Step 16)

• System does not include memory; selection of one memory option for each system is mandatory. Up to three additional memory options can be added for a total of 16 GB. (In earlier (D*-57AAA-**) models, configurations with more than 8 GB require three power supplies; N+1 functionality is not supported in configurations with over 8 GB.)

• Pedestal/Tower kit or Rackmount kit is mandatory for each system

• Systems support one disk drive cage; disk drive cage supports six 1-inch hard disk drives or a combination of 1-inch disk drives and hot-plug Universal tape devices. Each tape device uses two slots in the BA610-6D.

BA610-6D

• Selection of one disk drive is mandatory

• Selection of two power cords is mandatory for all systems

BN35S-4E

• One 68/1000-MHz CPU included, one additional CPU supported

• Two 500-watt power supplies included with system; optional third power supply provides N+1 redundancy (power cord not included, select power cord from Step 2e). Earlier (D*-57AAA-**) models with 375-watt power supplies require three power supplies when configured with greater than 8 GB of memory. N+1 functionality is not supported in earlier models in configurations with over 8 GB.

• BA610-6D drive cage drives connected to integrated Ultra3 SCSI adapter supports LVD Universal tape. Each device uses two slots

• StorageWorks Model 4314R, 4314T, and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-Bx split-bus shelf, two SCSI channels are required. No support for Model 4314R or 4314T single-bus shelves with embedded Ultra3 SCSI adapter or 3X-KZPEA-DB adapter. BN38C-xx cable is required when connecting to embedded Ultra3 SCSI adapter. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting.

• UltraSCSI configurations require UltraSCSI components (controllers, adapters, shelves, disks, and cables)

• UltraSCSI adapters and RAID controllers support UltraSCSI disks at UltraSCSI speeds in UltraSCSI shelves

• Mixing faster SCSI devices with slower SCSI devices will slow that entire SCSI bus to the slower speed.

• Tabletop tape drives require LVD host bus adapter and country-specific power cord

• Tape media may not be included, for more information see http://www.compaq.com/storage/productindextape.html

157769-B22

V7.3 requires Tima Kit: DEC-AXPVMS-VMS73_FIBRE_scsi-V0300

DS-HSG80-BK

HSV110

BN38C-xx

• H9A10 or H9A15 cabinet

• Rack kit for each system

• H9A10 or H9A15 rear cabinet extender

• Second PDU required with four or more systems in one cabinet

• Cabinet front door based on cabinet height

• Factory integration

• Ballast kit if one or two systems are ordered for the H9A15 cabinet

• Two Power cords for each system

• 12U of vertical cabinet space is reserved for one RA3000 controller shelf and up to five disk shelves mounted in top of cabinet, front to back; an additional 2U of vertical space is required for RA3000 controller shelf UPS.

• Disk shelves can be a combination of RA3000 DS-SWXRA-GN disk shelves and StorageWorks BA36R-RC/RD disk shelves.

• RA3000 controller shelf supports a maximum of four DS-SWXRA-GN disk shelves; third and fourth DS-SWXRA-GN disk shelf ordered will be installed in rear of M-series cabinet; rear mounted shelves require that a 2-meter SCSI cable (BN37A-02) be ordered separately.

• Systems are supported in remaining vertical space.

• Requires an additional H7602-DB/EB PDU

YS-ASCAA-AA

• Ballast is added to a cabinet at particular locations for specific configurations to meet safety regulations for installation, operation, and service; see Cabinet Configuration Chart

H9C10-MC

BN35S-4E

• Cabinets containing systems and storage must be assembled by qualified assemblers: Hewlett-Packard Manufacturing

• For custom integration of systems

• RAID Configuration Utility is accessible via console port for Tru64 UNIX and OpenVMS systems; optional graphics capability available

• Select graphics adapter, monitor, and country-specific keyboard if required

3X-DEPVZ-AA

Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: http://ftp1.support.compaq.com/public/
unix/v5.1b/t64v51bb1-c0003000-16672
-e-20030130.README
Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires: T64V51AAB21AS0004-20030206.tar
NOTE: Use BN34A, BN34B, or equivalent with SC connectors.

BN25H-03

• Each system node in the cluster requires a TruCluster software license (QL-6BRAC-AA) or
  TruCluster Plus Software Package (QP-6R9AC-AA)

• OpenVMS V7.3-1 and OpenVMS Cluster license (QL-MUZAC-AA) are required

• Up to two PCI-to-System Area Network adapters (CCMAB-AA) are supported in a single system. (Only one adapter is supported on earlier (D*-57AAA-**) models

• Two-node clusters can be configured by ordering a CCMAB-AA for each node and one BN39B-04 or BN39B-10 cable; cable connects directly to CCMAB-AA in each node.

• For a two-node cluster that will not need to be rebooted when adding additional members, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each node, and one CCMHB-AA hub for the cluster.

• For three- or four- node clusters, order one CCMAB-AA adapter and one
  BN39B-04 or BN39B-10 cable for each node, and one CCMHB-AA hub for the cluster. If two CCMAB-AAs are configured in each system, a second CCMHB-AA is required.

• CCMHB-AA includes four CCMLB-AA line cards and supports up to four nodes; expansion up to eight system nodes can be achieved by adding up to four CCMLB-AA line cards.

• If nodes must be separated by a distance longer than standard copper cables allow the CCMFB option converts the output of the standard CCMAB controller or CCMLB line card to single-mode fiber optic cable. The fiber optic connection may be up to 2,000 meters long between two CCMAB controllers connected in virtual hub mode, or 3,000 meters between a CCMAB controller and a CCMHB hub. (The connection from the CCMHB hub to a second system may also be 3,000 meters.) The CCMFB option requires a second PCI slot in the system from which it draws power only. It is normally connected to the corresponding CCMAB controller with the short BN39B-01 cable. The CCMFB is also used in the CCMHB hub where it occupies a slot normally used by the CCMLB line card, limiting expansion to four radial fiber optic connections.

• CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic connections. Two standard length single-mode fiber optic cables are available (BN34R-10 and BN34R-31); however, users normally provide this fiber optic connection. Fiber optic connectivity is completely transparent to the systems using it and has no performance impact.

• NOTE: When configuring with two Memory Channel Controllers (CCMAB-AA), all nodes in a Memory Channel cluster must have the window size jumper set to the same size, specifically 128

• Graphics monitors other than those listed can be used if compatible with SVGA graphics ordered with system.

• A video cable, 6-foot/1.8-meter length, is included with all variants of monitors

• Video extension cable required if monitor is located more than 1-meter from system.

• Monitors will ship with, but not be integrated with systems.

BN39C-02

• Order country-specific keyboard or mouse only if required
• All keyboards listed may not be available in all geographies
• Select an opal OpenVMS keyboard for use with VT5xx text terminals

3R-A3480-AA

3X-BC34A-06

• Any terminal can be used as a console device

• Third-party console devices require an EIA-232 25-pin DSUB connector

• Software Processor Code = E

• AlphaServer DS25 Tru64 UNIX systems include Unlimited User license, Server Extension license, Internet Express, and Secure Web Server

• AlphaStation DS25 Tru64 UNIX systems include Base 2-user license andOpen3D license

• AlphaServer DS25 OpenVMS systems include Base license with System Manager license and Enterprise Integration Server Package for OpenVMS Revision V3.1

• AlphaStation DS25 OpenVMS systems include Base license, Concurrent Use
  1-user license, NAS 150 Client license, and Open3D license

• Enterprise Integration Package includes licenses for TCP/IP Services for OpenVMS, DECwindows Motif for OpenVMS Alpha, DECprint Supervisor for OpenVMS Open, DECnet-Plus for OpenVMS Alpha End System, Archive/Backup System for OpenVMS Management Tools, Archive/Backup Agent for Windows NT, Office Server for OpenVMS, PATHWORKS 32, PATHWORKS V6 for OpenVMS – Advanced Server, and Office Server Client Access License

• OpenVMS Concurrent Use licenses provide the right to interactively use the operating system by the specified number of concurrent users on a designated OpenVMS system. OpenVMS Concurrent Use licenses can be moved from one system to another at user discretion and can be shared in a mixed OpenVMS VAX and OpenVMS Alpha cluster.

• OpenVMS Traditional Unlimited Use license is system specific and can only be used on one single system at a time. It cannot be shared between systems or in an OpenVMS VAX or OpenVMS Alpha Cluster.

• Select one of the optional CarePaq?/font> Priority Service Packages described below that best supports the customer’s operational requirements for system availability.

• CarePaq Priority Services are available for AlphaServer/AlphaStation systems running Tru64 UNIX or OpenVMS operating systems. Priority Services are designed for the growing number of customers who need support beyond the basic warranty. Five packages are offered - Priority, Priority 24, Priority Silver, Priority Gold, and Priority Executive with coverage for both Principal servers/stations and SSPs (Subsequent System Packages) - that meet a full range of customer support requirements.

• 9 x 5 HW/SW support

• 4-hour response on-site hardware support

• 2-hour response for Bronze software support

• License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)

• Condist update distribution for OpenVMS or Tru64 UNIX and their layered products. (Layered products not included on Condist can be ordered separately.)

• 24 x 7 HW/SW support

• Named HW engineer

• 4-hour response on-site hardware support

• 2-hour response for Bronze software support

• License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)

• Condist update distribution for OpenVMS or Tru64 UNIX and their layered products. (Layered products not included on Condist can be ordered separately.)

• 24 x 7 HW Support with Named Engineer, 4-hour response

• 24 x 7 Silver SW Support - Named Account Rep, 1-hour response Monday – Friday, 8AM-5PM local time; 2-hour response remaining hours

• License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)

• Condist update distribution for OpenVMS or Tru64 UNIX and their layered products. (Layered products not included on Condist can be ordered separately.)

• Technical newsletter and SW activity review

• Proactive Patch Notification

• One (1) System Healthcheck per year

• 24 x 7 HW support with Named Engineer, 4-hour response for on-site support

• 24 x 7 Gold SW support - Named Account Rep

• 30-minute callback (critical); 1-hour callback (non-critical)

• License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)

• Condist update distribution for OpenVMS or Tru64 UNIX and their layered products. (Layered products not included on Condist can be ordered separately.)

• Technical newsletter, SW activity review and 10 hours Upgrade impact planning

• Proactive Revision Management

• Two (2) System Healthchecks per year

• Mandatory pre-qualification required

• 24 x 7 HW support with Named Engineer, two-hour response for on-site support

• 24 x 7 Gold SW support - Named Account Rep

• 30-minute callback (critical); one-hour callback (non-critical)

• License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)

• Software update distribution on CD-ROM: OpenVMS or Tru64 UNIX and their layered products (Layered products not included on Condist can be ordered separately.)

• Technical newsletter, SW activity review and 10 hours Upgrade impact planning

• Proactive Revision Management

• Two (2) System Healthchecks per year

• Customer site must be within 25 miles of a HP service location

• Mandatory pre-qualification required

• For Priority, Priority 24, Priority Silver, Priority Gold, and Priority Gold Executive

• HW Support at same level as corresponding package for Principal server/station

• License Subscription: HP O/S (where applicable)

• Telephone support through Principal server/station covered by full support package

• Preinstallation review

• Unpacking of equipment

• Assemble and test

• Basic product usage info

• No software installation added

• Preinstallation review

• Unpacking of equipment

• Assemble and test

• Basic product usage info

• Install operating systems

• Product configuration

• Print and network access

• Orientation

• AlphaServer/AlphaStation DS25 systems include one-year parts and labor warranty with 5 x 9 on-site Next Business Day response.
• Priority Services include support for new HP branded hardware options internal to the AlphaServer/AlphaStation enclosure plus a monitor (17-inch or less excluding flat panel models).
• External storage devices/cabinets carry their own level of warranty and should be quoted separately for uplifted warranty services.
• Five years CarePaq Priority Service is available upon request. To quote five-year service, change the last two part number digits from 12 or 36 to 60.
• In addition to the CarePaq Priority Services, uplifted warranty Supplemental Services are available for separate hardware and software support. For more information on Hardware and Software Supplemental Services and other HP service options available for AlphaServers and AlphaStations, consult your Sales Account Manager or visit http://www.compaq.com/services/

NOTE: This web site is available in English only.

5G 11ms half-sine (rack)